Home >
Fax
>
Receive a Fax
Set a Remote Access Code
Related Models: MFC-L5700DN/MFC-L5755DW/MFC-L5900DW/MFC-L6700DW/MFC-L6900DW
Set a Remote Access Code to access and control your Brother machine even when you are away from it.
Before you can use the remote access and retrieval features, you must set up your own code. The factory default
code is the inactive code (---*).
1. Press
[Settings] > [All Settings] > [Fax] > [Remote Access].
2. Enter a three-digit code using the numbers [0] to [9], [*] or [#] using the LCD (the preset '*' cannot be
changed), and then press [OK].
•
DO NOT use the same code used for your Remote Activation Code (*51) or Remote Deactivation Code
(#51).
•
To make your code inactive, press and hold
[OK].
3. Press
.
Related Information
•
Remote Fax Retrieval
>
Remote Fax Retrieval
> Set a Remote Access Code
to restore the inactive setting (---*), and then press
250