Setting The Mac Address - Marantz PMD580 Service Manual

Network solid state recorder
Table of Contents

Advertisement

3. SETTING THE MAC ADDRESS

Set "Mac Address" in Service mode.
1. Press the POWER ON/OFF switch to turn on the power.
2. If you press and hold both the STOP/CANCEL button
and DISPLAY/LOCK button for several seconds,
the unit will enter Service mode.
The following display appears.
Turn right the Jog wheel until "Mac Add Set" is displayed,
as shown below.
3. Press the Jog wheel with "Mac Add Set" displayed.
The following display appears.
4. Set the Mac Address. Turn the Jog wheel until the target
digit is set then press the Jog wheel.
(Set each digit of the address from left to right in sequence.)
(Example) When the address is to be set to "91-15-00"
Once all 6 digits of the Mac Address have been set,
press the Jog wheel.
3. MAC ADDRESS 設定方法
サービスモードにある "Mac アドレス" 設定を行います。
1. POWER ON/OFF スイッチを押し、 PMD580 の電源を入
れます。
2. STOP/CANCEL ボタンと DISPLAY/LOCK ボタンを同時
に長押しすると、 本機はサービスモードになります。
このとき、 以下のように表示します。
ジョグダイヤルを時計方向に回し、 下図の
表示させます。
3. "Mac Add Set" を表示させた状態で、 ジョグダイヤルを
押します。このとき、 以下のように表示します。
4. 次に、 Mac アドレスを設定します。ジョグダイヤルを回
して目的の数字を設定し、 ジョグダイヤルを押します。
(アドレス設定は、 左から順に設定します。 )
(例) アドレスを "91-15-00" に設定したとき
Mac アドレス (6 文字) を設定し終わったらジョグダイヤル
を押します。
5
"
"
Mac Add Set

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents