Table of Contents
Advertisement
Function
LED Behavior
TV Remote
VZtv Rmt
On
Program Remote
Prg Remote
Eco Power On/Off
EcoPwr
Speaker Test
Spkr Test
Link
Link
On
Reset
Reset
No
When a Dolby
Digital or DTS signal
is detected.
When the soundbar
successfully
connects to Wi-Fi.
Press the Next/Previous button to enable/disable VIZIO TV Remotes. When enabled
TV Remote On
(On), you can use a VIZIO TV remote control to turn on the sound bar (using the TV
Volume Up button) and control volume.
TV Remote Off
Press the Next/Previous and Play buttons to toggle and select and program your
−−
TV remote to control the Volume Down, Volume Up, and Mute functions on your
sound bar. See the Program Remote section for more information.
Press the Next/Previous button to enable/disable Eco Power Mode. When enabled
Eco Power On
(On), the sound bar will go into standby after a period of inactivity. The sound bar
will automatically turn off when no audio signal is detected. Off disables this feature.
Eco Power Off
Note: If you would like to cast content without the need to manually turn on the
sound bar, set this function to OFF.
Press the Play/Pause button to activate the speaker test function. A voice will begin
calling out each speaker beginning with left front . (Left Front, Center, Right Front,
—
and subwoofer-white noise) If any of these are missing, check the connection and
run the speaker test function again.
Press the Next/Previous and Play buttons to select and confirm enabling or
Single light with sound
disabling Link Mode on your sound bar. Link Mode allows the VIZIO SmartCast App
upon confirmation
to reconnect the sound bar to Wi-Fi or paired bluetooth devices in the event of a lost
connection or if a new device is being paired.
Press the Next/Previous and Play buttons to select and reset your remote and
sound bar to the factory default settings. All paired Bluetooth devices will be un-
−−
paired. All programmed IR remotes will also be removed. See the Reset to Factory
Default Settings section for more information.
Dolby Digital and DTS are only available on either the Coaxial In, HDMI IN or
Dolby Digital and DTS
Digital Optical Audio In inputs. When a Dolby Digital or DTS signal is detected, the
Indicator LED
Dolby Digital (White) / DTS (Blue) indicator LED will light up for 5 seconds before
fading away.
When Wi-Fi is succesfully set up via the VIZIO SmartCast app, the blue indicator LED
Wi-Fi Indicator LED
will light up to confirm a successful connection.
Description
English - 27
Hide quick links:
Advertisement
Table of Contents
