Vizio SB4531-D5 Quick Start Manual page 19

9
Top
Remove the battery cover by gently
sliding it away from the remote.
11
Turn your TV on, the sound bar will automatically turn on and
begin searching for an active input.*
The LED indicators on the front of the sound bar will begin cycling
in pairs through inputs until an audio source is detected.**
Tip: Pressing the INPUT button will stop
You can press the INPUT button to switch between audio
sources. For example, if you connected your TV to AUX 1, set the
sound bar to AUX 1.
*Occurs only during first-time set up.
**Auto detect function only occurs once when the sound bar is first powered on. To enable this feature again, you must
do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT
button for 3 seconds.
VIZIO recommends replacing the batteries
that came with this remote with two, new
Duracell 'AAA' alkaline batteries.
the auto detect function.
10
Top
PILAS PILAS
Insert the included batteries and gently
RECOMENDADAS RECOMENDADAS
slide the battery cover back into place.
RECOMMENDED
BATTERIES
Power
PILAS PILAS
RECOMENDADAS RECOMENDADAS
PILAS PILAS
RECOMENDADAS RECOMENDADAS
1A1
7752o • FSC
LAM DESIGN • 09.01.15
Input
English - 19