Panasonic KX-FC195AL Operating Instructions Manual page 61

5. Press {>}.
6. Press {e} or {v} repeatedly to display
"HSPIN CHANGE".
7. Press {>}.
8. Enter the current 4-digit handset PIN.
9. Enter the new 4-digit handset PIN.
10. Enter the new 4-digit handset PIN again to
verify.
11. Press {ih}.
Setting the auto talk
1. Press {j}.
2. Press {e} or {v} repeatedly to display
"SETTING HS".
3. Press {>}.
4. Press {e} or {v} repeatedly to display
"OTHER OPT".
5. Press {>}.
6. Press {e} or {v} repeatedly to display
"AUTO TALK".
7. Press {>}.
8. Press {e} or {v} repeatedly to select the
desired setting.
"ON": You can answer a call by just lifting the
handset off the base unit without pressing
{C}.
"OFF" (default): Deactivates this feature.
9. Press {>} or {j}.
10. Press {ih}.
Setting the battery type
1. Press {j}.
2. Press {e} or {v} repeatedly to display
"SETTING HS".
3. Press {>}.
4. Press {e} or {v} repeatedly to display
"OTHER OPT".
5. Press {>}.
6. Press {e} or {v} repeatedly to display
"BATTERY TYPE".
7. Press {>}.
8. Press {e} or {v} repeatedly to select the
desired setting.
"NI-MH" (default): Nickel metal hydride
batteries are used.
"NI-CD": Nickel cadmium batteries are used.
9. Press {>} or {j}.
10. Press {ih}.
8. Programmable Features
Resetting the handset settings to their
default settings
The handset can be reset to the following default
settings.
The words in parentheses indicate the codes
used if the Command Interface is selected for the
display language (page 57).
Feature
Time alarm mode ("F1")
Alarm time
Ringer volume ("F21")
External ringer pattern
("F22")
Internal ringer pattern
("F23")
Paging tone pattern
("F24")
Alarm tone pattern
("F25")
Key tone ("F31")
Call waiting tone ("F32")
Range warning alarm
("F33")
Battery low alarm ("F34")
Standby mode display
("F41")
Talk mode display ("F42")
Display language ("F43")
Call BAR mode ("F51")
Direct call mode ("F53")
Direct call number ("F52")
Handset PIN ("F61")
Auto talk ("F62")
Base unit access ("F9")
(page 63)
Redial memory
Receiver volume
1. Press {ih}.
2. Press {j}.
3. Press {v}.
4. Press {>}.
5. Press {e}.
Default setting
"OFF"
Clear
High
"1"
"1"
"1"
"1"
"ON"
"ON"
"OFF"
"ON"
"CLOCK"
"TALK TIME"
"ENGLISH"
"OFF"
"OFF"
Clear
"0000"
"OFF"
"AUTO"
All clear
Medium
59