Table of Contents
Advertisement
1. Introduction and Installation
may occur from the use of non-Panasonic
replacement film.
1
Open the covers (see steps 1 to 3 on page
14).
2
Pull out the blue gear (1) and remove the
used ink film (2). Remove the used core
(3).
1
3
Remove the stoppers (1) and tags (2) from
the new ink film (3).
1
3
4
Insert the ink film and close the covers (see
steps 4 to 6 on page 15).
16
3
2
2
1
1.9 Paper tray
Insert the tab (1) on the paper tray (2) into the
slot on the back of the unit (3).
1.10 Metal recording paper
guide
Attach the metal recording paper guide (1) into
the slots on the recording paper exit (2).
2
L The recording paper will be ejected from the
top of the unit after printing. The metal
recording paper guide prevents the printed
paper from curling.
2
1
3
1
Advertisement
Table of Contents
