Setting the date, time, logo and facsimile
telephone number
Before using your unit, program the correct date and time, your logo and your facsimile telephone
number.
This information will be printed on the top of each page transmitted from your unit.
To change the print position, see page 40.
Setting the date and time
Press (MENU).
1
K
@ A
2
Press
, then
Press (START/COPY/SET).
3
4
Enter the correct month/day/year/hour/minute
by selecting each 2 digits.
J
Then press
for AM or
Example: Aug. 10 1996, 3:00PM
@H A@ IF @C
Press
@@
, then press
Press (START/COPY/SET).
5
Press (MENU).
6
Setting your logo
Usually the logo is a company, division or personal name in an abbreviated form.
Press (MENU).
1
K
@ B
2
Press
, then
Press (START/COPY/SET).
3
4
Enter your logo up to 30 characters.
¡Refer to the instructions on page 15.
Press (START/COPY/SET).
5
Press (MENU).
6
14
SYSTEM SET UP
.
SET DATE & TIME
K
for PM.
K
for PM.
SYSTEM SET UP
.
YOUR LOGO
LOGO=
(MENU)
Dial keypad
1
2
3
4
5
6
7
8
9
0
Note:
¡If you make a mistake while programming,
press (STOP) then make corrections.
¡The accuracy of the clock will be
approximately L60 seconds a month.
(MENU)
Dial keypad
1
2
3
4
5
6
7
8
9
0
(STOP)
(START/COPY/SET)
(START/COPY/SET)