Panasonic DMC-TS10 Basic Operating Instructions Manual page 18

Table of Contents

Advertisement

Specifications
Hi-speed burst
Burst speed
Approx. 4.6 pictures/second
Number of
Approx. 15 pictures (When using the built-in
recordable
memory, immediately after formatting)
pictures
Max. 100 pictures (When using a card, it may differ
depending on the type of card and the recording
conditions)
Shutter speed
8 to 1/1600 th
[STARRY SKY] Mode: 15 seconds, 30 seconds,
60 seconds
Exposure (AE)
AUTO (Program AE)
Exposure Compensation
(1/3 EV Step, -2 EV to +2 EV)
Metering Mode
Multiple
LCD monitor
2.7" TFT LCD (4:3)
(Approx. 230,400 dots)
(field of view ratio about 100 %)
Flash
Flash range: (ISO
Microphone
Monaural
Speaker
Monaural
Recording media Built-in Memory (Approx. 40 MB)/SD Memory Card/
SDHC Memory Card/SDXC Memory Card
Recording file
format
Still picture
JPEG (based on Design rule for Camera File
system, based on Exif 2.3 standard)/
DPOF corresponding
Motion
QuickTime Motion JPEG
pictures
(motion pictures with audio)
Interface
Digital
USB 2.0 (Full Speed)
Analog video/
NTSC Composite, Audio line output (Monaural)
audio
Terminal
AV OUT/DIGITAL: Dedicated jack (8 pin)
DC IN: Dedicated jack (2 pin)
34
VQT2X42 (ENG)
(Continued)
) Approx. 30 cm (0.99 feet)
to 4.9 m (16.08 feet) (Wide)
Dimensions
Approx. 100.3 mm (W) x 63.5 mm (H) x 21.6 mm (D)
[3.95" (W) x 2.50" (H) x 0.85" (D)]
(excluding the projection part)
Mass
With card and battery: Approx. 172 (0.38 lb)
Excluding card and battery: Approx. 152 (0.34 lb)
-10 °C ∗
Operating
to 40 °C (14 °F to 104 °F)
1
temperature
The performance of the battery (number of
1
recordable pictures/operating time) and the LCD
monitor (ghost images appearance, etc.) may drop
temporarily when using the camera between -10 °C
(14 °F) and 0 °C (32 °F) (in cold environments such
as a ski resort).
Operating
10 %RH to 80 %RH
humidity
Waterproof
Equivalent to IEC 60529 'IPX8'
performance
(Usable for 60 minutes in water depth of 3 m (10 feet))
Anti-shock
The camera's test method complies with MIL-STD
810F (Method 516.5-Shock) ∗
performance
'MIL-STD 810F (Method 516.5-Shock)' is the test
2
method standard of the U.S. Defense Department,
which specifies performing drop tests from a
height of 122 cm (4.00 feet), at 26 orientations
(8 corners, 12 ridges, 6 faces) using 5 sets of
devices, and passing the 26 orientation drops
within 5 devices. (If failure occurs during the test,
a new set is used to pass the drop orientation test
within a total of 5 devices)
• Panasonic's test method is based on MIL-STD 810F
(Method 516.5-Shock) that is described above, with
the drop height changed from 122 cm (4.00 feet)
to 150 cm (5 feet). The camera cleared a test of
being dropped onto 3 cm (0.10 feet) thick plywood.
(Disregarding exterior changes such as paint peeling
or deformation in the dropping impact areas.)
This is not a guarantee of no breakdowns or
malfunctions under all conditions.
Dustproof
Equivalent to IEC 60529 'IP6X'
performance
Language select [ENGLISH]/[ESPAÑOL]
.
2
35
(ENG) VQT2X42

Advertisement

Table of Contents
loading

Table of Contents