Appendix A. CRU instructions
Note: The CRU service is only applicable to certain countries.
Removing the optical drive
To remove the optical drive, do the following:
1
Turn off the computer. Disconnect the AC power adapter and all cables from the computer.
2
Close the computer display, and then turn the computer over.
3
Remove the screw shown in the illustration
4
Gently pull the optical drive out
5
Remove the screw
d
arrow
.
b
.
c
, then remove the optical drive bracket in the direction shown by
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
a
.
29