Cisco 7200 VXR User Manual page 43

Chapter 1 Cisco 7200 VXR Product Overview
Figure 1-24 C7200-I/O-FE LEDs and CPU Reset Button
Table 1-26 C7200-I/O-FE I/O Controller LEDs
LED
MII EN
RJ45 EN
RJ45 LINK
78-5469-04 B0
Color Function
Green Indicates that the Fast Ethernet MII receptacle is initialized and enabled by
the system, and is configured for operation. This LED comes on after the
I/O controller has been enabled and the MII receptacle has been configured
as the media type for the Fast Ethernet port (the RJ-45 receptacle is the
default media type for the Fast Ethernet port). This LED remains on during
normal operation of the router.
Green Indicates that the Fast Ethernet RJ-45 receptacle (the default media type
for the Fast Ethernet port) is initialized and enabled by the system. This
LED comes on after the I/O controller has been enabled and remains on
during normal operation of the router.
Green Indicates that the Fast Ethernet RJ-45 receptacle has established a valid
link with the network. This LED remains off during normal operation of
the router unless there is an incoming carrier signal.
Cisco 7200 VXR Installation and Configuration Guide
Field-Replaceable Units
1-43