Cisco 7200 VXR User Manual page 3

Chapter 1 Cisco 7200 VXR Product Overview
Table 1-1 Cisco 7200 VXR Physical Specifications (continued)
Description
Dimensions
(H x W x D)
Weight
Heat dissipation
AC-input voltage rating
AC-input current rating
AC-input frequency rating
AC-input cable
DC-output power
DC-input voltage rating
DC-input current rating
DC-input cable
Chassis fan noise
levels—single speed fan
Airflow
Temperature
Humidity
Recommended minimum
software requirements
Compliance
78-5469-04 B0
Specification
5.25 in. x 16.8 in. x 17 in. (13.34 cm x 42.67 cm x 43.18 cm)
Chassis fully configured with a network processing engine or network services engine, I/O
controller, maximum number of port adapters, 2 power supplies, and a fan tray: ~ 50 lb (22.7 kg)
2
370W (1262 BTU )
3
100–240 VAC wide input with power factor correction
4
5A at 100–240 VAC with the chassis fully configured
5
50/60 Hz
6
18 AWG three-wire cable, with a three-lead IEC-320 receptacle on the power supply end, and
a country-dependent plug on the power source end
280W maximum (with either a single or dual power supply configuration)
7
–48 VDC nominal in North America
–60 VDC nominal in the European Community
13A at –48 VDC (370W/–48 VDC = 7.7A typical draw)
8A at –60 VDC (370W/–60 VDC = 6.2A typical draw)
In accordance with local and national wiring regulations
Tested:
• Front (I/O controller and port adapter side) 44.2 dB
• Back (power supply side) 43.7 dB
• Left (fan side) 47.2 dB
Right 44.8 dB
•
Maximum: 65 dBa
8
~80 cfm
32 to 104 F (0 to 40 C) operating; –4 to 149 F (–20 to 65 C) nonoperating
10 to 90% noncondensing
Cisco IOS Release 12.0(2)XE2 or later releases of 12.0 XE
Cisco IOS Release 12.1(1)E or later releases of 12.1 E
Cisco IOS Release 12.0(5)S or later releases of 12.0 S
Cisco IOS Release 12.0(3)T or later releases of 12.0 T
Cisco IOS Release 12.2(1) or later releases of 12.2
Cisco IOS Release 12.2 (4)B or later releases of 12.2 B(
CE Marking
Cisco 7200 VXR Installation and Configuration Guide
Physical Description
1-3