Yamaha PSR-A350 Owner's Manual page 21

How the effect is applied to the sound for
the various Types
• Harmony Type 001 to 005
Press the right-hand keys while playing chords in the
auto accompaniment range of the keyboard when
Auto Accompaniment is on (page 24).
• Harmony Type 006 to 012 (Trill)
• Harmony Type 013 to 019 (Tremolo)
• Harmony Type 020 to 026 (Echo)
• Arpeggio Type 027 to 178
When Split is off:
Arpeggio function applies to the Main Voice
and the Dual Voice.
When Split is on:
Arpeggio function applies only to the split
Voice.
NOTE
• Arpeggio cannot be applied to the Split and Main/
Dual Voices simultaneously.
• Selecting a Voice number between 210 and 222 as
the Main Voice will turn on Arpeggio and Split auto-
matically.
To adjust the Harmony Volume:
This can be adjusted via Function number 044 (page
43).
To adjust the Arpeggio Velocity:
This can be adjusted via Function number 045 (page
43).
Hold down two keys.
Keep holding
down the keys.
Play the keys.
Playing a Variety of Instrument Voices
Holding the Arpeggio Playback via the
Footswitch (Hold)
You can set the instrument so that Arpeggio playback
continues even after the note has been released, by
pressing the footswitch connected to the [SUSTAIN]
jack.
1
Press a [FUNCTION] button a number of
times until the "Pdl Func" (Function 046;
page 44) item appears on the display.
After "Pdl Func" is shown for a few seconds, the
current setting is shown.
Pdl Func
046
Sustain
1
046
2
Use the number buttons [1]–[3], [+], [-]
buttons to select "Arp Hold."
If you want to restore the footswitch function to
sustain, select "Sustain." If you want to use both
hold and sustain functions, select "Hold+Sus."
Arp Hold
2
046
3
Try playing the keyboard with Arpeggio
playback using the footswitch.
Press the notes to trigger the Arpeggio, then
press the footswitch. Even if you release the
notes, Arpeggio playback will continue. To stop
Arpeggio playback, release the footswitch.
PSR-A350 Owner's Manual
21