Advertisement
Figure 1.
Dimension A: 2.75 inches
INSTALLATION INSTRUCTIONS
1. Turn on kitchen faucet (cold) and then close the cold
water supply valve to relieve water pressure.
2. Select the desired loca on for the filter system.
3. NOTE: This system can either be mounted to an
interior wall surface or it can installed with the system
placed on the floor of the cabinet– ver cal only.
You will be connec ng to the exis ng line with 3/8"
tubing and fi ngs (SUPPLIED).
3. If moun ng to interior wall; using the filter head
(Figure 1) as a guide, mount the filter head to the
wall with the supplied moun ng screws. Allow 3
inches of clearance from bo om of the filter for ease
of filter removal.
4. Place a towel around the supply valve and then
proceed to remove the cold side hose from your cold
water supply valve that feeds water to the faucet.
5.
Install the female adapter fi ng to the male thread
on the cold water shut‐off valve (Figure 2) This
should be a secure fit. DO NOT OVERTIGHTEN.
Figure 2.
Female Adapter
Advertisement
