Power Input Connection; Power Management; Analog Display Identification; Dvi-D Display Identifecation - Philips 190B8CS/00 Service Manual

3.6 Power input connection

Power cord length
Power cord type

3.7 Power management

The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
Mode
Power-On
Off
DC Power Off

3.8 Analog Display identification

In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.9 DVI- D Display identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3

3.10 USB Plug support

Connect the upstream port of the monitor to host PC's USB port via USB cable, then attach external device to the
downstream port of the monitor. Check if the device can work properly.
3.11 DDC/ CI Support
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with Protrait Display Tune at
least.

3.12 EDID

Data for EDID & .inf file
1 User visible strings on .inf file
2 Manufacturer ID ( EDID data)
3 Product ID, "xxxx" 4 codes
4 maximum resolution
5 Horizontal Frequency Range
6 Vertical Frequency Range
7 Monitor Name (13 characteries max.)

3.13 Hot-key definition

Monitor Controls Lock
Factory Mode
Demo mode for smart image
DDC/CI On/OFF for VISTA
3.14 Smart Bright --Dynamic Brightness Control (DBC) (Not required for this product)
DCR controlled by Scaler
: 1.8 M
: 3 leads power cord with protective earth plug.
HSYNC VSYNC Video
On On active
Off Off blanked
Key
OK(Menu)
AUTO+ OK+ Power On
Smart Image Key
MENU+DOWN
Power-cons.
36W typical
< 1 W
N/A < 1 W
Philips 190B (19inch LCD MONITOR 190B8)
PHL
MSB(byte 12): 08
LSB (byte 11): 5A
1280x1024
30~83 KHz
56~76Hz
Philips 190B
Key Press Time
6 sec (lock/unlock)
Keep pressing when power on
3 sec (Enter/Quit)
6 sec (lock/unlock)
Indication Rec. time
Green LED --
Amber LED < 3 s
LED Off
OSD Timeout
3 sec
3 sec