Page 1: Table Of Contents
CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES. CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES 312278517250 Published by Philips CE Copyright reserved Subject to modification ○ Jun, 10, 2007...
Page 2: Revision List
Version Release Date Revision History Jun.10, 2007 Initial release, Draft Version Oct.16,2007 Add Philips 12NC for Model 190B8CB/69 and 190B8CB/75 Nov.07, 2007 Update C907 in Item 16 Nov.21, 2007 Update 190B8 CD MANUAL in Item 16 Nov.25,2007 Add Philips 12NC for 715GT039 A Apr.08,2008...
Page 3: Important Safety Notice
HUDSON 8 Important Safety Notice Proper service and repair is important to the safe, reliable operation of all Philips Company Equipment. The service procedures recommended by Philips and described in this service manual are effective methods of performing service operations. Some of these service operations require the use of tools specially designed for the purpose.
Page 4: Monitor Specifications
HUDSON 8 1. Monitor Specifications...
Page 5 HUDSON 8...
Page 6: Lcd Monitor Description
HUDSON 8 2. LCD Monitor Description The LCD monitor will contain a main board, a power board, an audio board and a key board which house the flat panel control logic, brightness control logic and DDC. The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips each voltage.
Page 7: Operation Instructions
HUDSON 8 3. Operating Instructions 3.1 General Instructions Press the power button to turn the monitor on or off. The other control buttons are located at the front of the panel of the monitor. By changing these settings, the picture can be adjusted to your personal preferences. The power cord should be connected.
Page 8 HUDSON 8 Rear View...
Page 9: Adjusting The Picture
Description of the On Screen Display On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on...
Page 10 HUDSON 8 The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.
Page 11: Connecting To The Pc
HUDSON 8 3.4 Connecting to the PC 1) Connect the power cord to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation. 2) Connect to PC (a) Turn off your computer and unplug its power cable.
Page 12: Input/Output Specification
HUDSON 8 4. Input/ Output Specification 4.1 Input Signal Connector Analog connectors Pin No. Description Pin No. Description Red video input Green video input Logic Ground Blue video input Ground Sense (GND) Serial data line (SDA) Cable detect (GND) H. Sync Red video ground V.
Page 13: Factory Preset Display Modes
HUDSON 8 4.2 Factory Preset Display Modes 4.3 Pixel Defect Policy...
Page 14 HUDSON 8...
Page 15 HUDSON 8...
Page 16: Failure Mode Of Panel
HUDSON 8 4.4 Failure Mode Of Panel Quick reference for failure mode of LCD panel this page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical Polarizer has bubbles instruction on this manual to eliminate failure by replace LCD panel.
Page 17: Block Diagram
HUDSON 8 5. Block Diagram 5.1 Software Flow Chat...
Page 18 HUDSON 8 1) MCU initialize. 2) Is the EPROM blank? 3) Program the EPROM by default values. 4) Get the PWM value of brightness from EPROM. 5) Is the power key pressed? 6) Clear all global flags. 7) Are the AUTO and SELECT keys pressed? 8) Enter factory mode.
Page 19: Electrical Block Diagram
HUDSON 8 5.2 Electrical Block Diagram 5.2.1 Main Board Panel Interface (CN402) Scalar NT68665MFG EEPROM Keypad Interface (Include MCU, ADC, OSD) M24C16 (CN401) (U203) (U204) D-Data H sync D-Clock Crystal V sync 12.000MHZ DVI_SDA, (X201) VGA_SDA, DVI_SCL VGA SCL D-Sub Connector Connector (CN101)
Page 20 HUDSON 8 5.2.2 Inverter/Power Board AC input Bridge Rectifier Transformer Rectifier diodes EMI filter and Filter Start Circuit: R905 CN902 Feedback PWM Control IC Circuit （IC901） ON/OFF Output Transformer MOSFET Circuit ON/OFF Lamp Over Voltage Control Control IC Feedback （IC801） Circuit...
Page 21: Schematic Diagram
HUDSON 8 6. Schematic 6.1 Main Board 715G2561-1 D-SUB/DVI BAV70 DVI_5V CN101 F3 CN102 A1 D102 FB101 DVI_VDD C101 E4 120 OHM DVI_5V C102 A7 FB107 +5V_ESD C103 A8 C104 A9 C105 A10 C106 C107 D103 C106 A4 R106 120 OHM BAV99 D105 C107 A5...
Page 22 HUDSON 8 MCU+SCALER NT68665 PARTS NONE OD U203 NT68665 NT68670 CN202 G1 R209 FB202 DVI_VDD C201 F5 120OHM R228 C202 G9 ADC_VAA MCU_VDD C203 A2 R218 C204 B2 TCLK1M C205 B2 VGA_VDD C212 0.1u TCLK1P C206 B2 C203 Q201 2N3906S-RTK/PS C211 0.1u C207 B2...
Page 23 HUDSON 8 DC-DC PANEL_VCC U303 CN301 D1 NC/LD1117S33 C301 B6 C302 A4 R302 R303 C303 A4 C302 C304 B3 10uF/16V C303 1/4W 1/4W C305 B7 0.1uF 16V R305 C306 B8 10K 1/16W C307 B8 C308 B2 Q302 C309 E7 R307 AO3401 U301 C310 E9...
Page 24 HUDSON 8 CONNECTOR CN402 +3.3VCC TCLK1M TCLK1P CN401 R407 CN401 B4 KEY1 TCLK2M KEY1_PAD CN402 A3 TCLK2P KEY2_PAD CN403 E2 POWER C402 100R 1/16W Auto/Left/Right key R411 LED_G CN404 E6 LED_O NC/22 CN405 F5 CN406 C1 BRIGHTNESS LF_B 0.1uF 16V CN407 E5 LIGHT_SEN C401 E8...
Page 25: Power Board
HUDSON 8 6.2 Power Board 715G2594-1 POWER 1/4W R951 BD901 1/4W R952 KBP208G C920 1/4W R953 0.001uF/500V FB903 BEAD BD901 A1 CN901 E1 CN902 C8 C900 E4 D920 L921 SBT150-10LST 3.5uH F902 C901 B2 C902 B2 T901 0R05 1/4W C903 B2 C904 B8 80GL17T-33-N2 C907 B2...
Page 26 HUDSON 8 INVERTER PT801 R801 0R05 1/10W 5% POWER X'FMR CN801 +12V L801 CONN C801 R802 10pF/3KV 100R 1/8W 5% R850 R810 R805 R804 0R05 1/10W 5% 4.7K 1/10W 5% Q802 R808 Q801 1/4W 10K 1/10W 1% PDTC144WK PDTA144WK 1/4W CN802 ON/OFF R806...
Page 27: Audio Board
HUDSON 8 6.3 Audio Board 715G2562-1 AUDIO CN602 CN601 C1 CN602 B8 +12V AUDIO_STANDBY C601 C2 VOLUME HP_SENSE C602 B3 GND_AUD GND_AUD C603 B4 ZD601 AUD_12VCC LOUT+ ROUT+ C604 C7 LOUT- ROUT- HP_L HP_R C605 C7 +12V C606 C7 C603 C607 C8 1N5819 C602...
Page 28: Pcb Layout
HUDSON 8 7. PCB Layout 7.1 Main Board 715G2561-1 C101 C215 D105 Q301 R144 R410 C102 C216 D106 Q302 R201 R411 C103 C219 D107 Q305 R202 R412 C104 C220 D108 Q402 R205 R413 C105 C222 D109 Q403 R206 R414 C106 C301 D110 Q404...
Page 29 HUDSON 8...
Page 30: Power Board
HUDSON 8 7.2 Power Board 715G2594-1 BD901 D4 J802 C801 J803 C805 J804 C811 J805 C812 J806 C900 J808 C901 J809 C902 J810 C903 J811 C907 J812 C909 J817 C910 J819 C911 J901 C920 J903 C921 J904 C922 J905 C923 J906 C924 J909...
Page 31 HUDSON 8 C802 J907 R843 C803 J908 R844 C804 Q801 R845 C806 Q802 R846 C807 Q803 R847 C808 Q804 R848 C809 Q805 R849 C810 Q806 R850 C813 Q807 R851 C814 Q808 R852 C815 Q809 R853 C816 Q810 R900 C817 Q811 R901 C818 Q812...
Page 32: Audio Board
HUDSON 8 7.3 Audio Board 715G2562-1 C601 FB601 C1 C602 FB602 C1 C603 FB603 C1 C604 FB604 A1 C605 FB605 C1 C606 FB606 B1 C607 FB607 B1 C608 FB608 B1 C609 R601 C610 R602 C611 R603 C612 R604 C613 R605 C614 R606 C615...
Page 33 HUDSON 8...
Page 34: Key Board
HUDSON 8 7.4 Key Board 715G1766-1M CN101 A4 CN102 A4 CN103 A4 CN104 A1 GND1 J101 J102 J103 J104 J105 LED1 C101 C102 C103 C104 C105 C106 C107 C108 C109 C110 C111 C112 L101 L102 L103 R101 R102 R103 R104 R105 R106 R107...
Page 35: Wiring Diagram
HUDSON 8 8. Wiring Diagram Lamp Wire Harness Panel Lamp Wire Harness Power Wire Harness CN801 Panel Interface CN902 CN802 CN301 CN402 CN602 CN403 Power Board Audio Main Board Board CN401 CN804 CN901 CN803 CN102 CN101 CN601 Phone Jack D-SUB AC-IN Key Board Wire CN103...
Page 36: Mechanical Instructions
HUDSON 8 9. Mechanical Instructions Steps of dismantling base stand from base column Step 1: Place the monitor face down on a smooth surface as Fig 1. Be careful to avoid scratch and injury during the uninstallation. Meanwhile, it is need to avoid pressing the control key. Fig1 Step 2: Insert a sheet, as Fig 2.2, to the base stand as Fig 2.1.
Page 37 HUDSON 8 Step 3: Put out the base emphatically as Fig 3, then you can disjoin the base from the stand. Fig3 Step 4: Turn the stand, then pull out the hinge cover as Fig 4. Fig4...
Page 38 HUDSON 8 Step 5: Pull out the stand cover emphatically as Fig 5. The stand cover Fig5 Step6: Unfasten the four screws on the hinge as Fig 6. then dismantle base stand from base column. Fig6...
Page 39 HUDSON 8 Fig 7...
Page 40 HUDSON 8 Back View as Fig.1 Fig.1 2. Remove hinge cover as Fig.2. Remove the hinge cover as Fig.2 Fig.2...
Page 41 HUDSON 8 3. Remove rear cover as Fig.3. Pull out the stand cover emphatically as fig.3. Fig.3 4. Remove base stand as Fig.4 Remove the four screws as Fig.7 to remove the base stand. Fig.4...
Page 42 HUDSON 8 5. Remove back cover as Fig.5 Remove the three screws to remove the back cover as Fig.5. Fig.5 6. Remove the shields of the main board and power board as Fig.6. Remove the 8 screws as Fig.6 to remove the shields. Fig.6...
Page 43 HUDSON 8 7. Remove the main board，audio board and the power board as Fig.7 Remove the 9 screws as Fig.7 to remove the main board、 audio board and the power board. Fig.7 8. Remove the bezel as Fig.8. Remove the 4 screws as Fig.8 to remove the bezel. Fig.8...
Page 44 HUDSON 8 9. Remove the main frame as Fig.9. Remove the 4 screws as Fig.9 to remove the main frame. Fig.9...
Page 45: Trouble Shooting
HUDSON 8 10. Trouble Shooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
Page 46 HUDSON 8...
Page 47: Repair Flow Chart
HUDSON 8 11. Repair Flow Chart 11.1 Main Board (1). No Power No power Press power key and look if the picture is normal Please reinsert and make sure the AC of 100-240 is normal Reinsert or check the Adapter/Inverter section Measure U301 PIN2=3.3V Measure U304 PIN2=1.8V...
Page 48 HUDSON 8 (2). No Picture No picture Measure U301 PIN2=3.3V Measure U304 PIN2=1.8V Replace D301, U301 or U304 X201 oscillate waveforms are normal Replace X201 Check if the sync signal from computer is output and video cable Input the sync signal of computer, or change Replace U203...
Page 49 HUDSON 8 (3). White screen White screen Measure Q301 base X201 oscillate waveform is normal is high level? Replace X201 Check Q301, Q302 is broken or CN402 solder? Check reset circuit of U203 is normal Check Correspondent Check Correspondent component. component.
Page 50 HUDSON 8 11.2. Power/Inverter Board (1) No power Check CN902 pin4, 5 = 12V Check AC line volt 110V or 220V Check AC input Check the voltage of C907 (+) Check bridge rectified circuit and F901 circuit Check start voltage for the pin8 of IC901 Check R905 and Change IC901 Check the auxiliary voltage is bigger than 10V and smaller than 20V...
Page 51 HUDSON 8 (2) W / LED, No Backlight Check CN902 pin4, 5 = 12V Check adapter or MB Check ON/OFF signal Check Interface board Check IC801 PIN12=12V Change Q801 Check IC801 PIN10, 9 have the output of square wave at short Change IC801 Check Q804, Q809 PIN5, 6, 7, 8 have the output of square wave at short time.
Page 52 HUDSON 8 11.3 Key Board OSD is unstable or not working Connect Key Pad Board Is Key Pad Board connecting normally? Replace Button Switch Is Button Switch normally? Replace Key Pad Board Is Key Pad Board normally? Check Main Board...
Page 53: Isp Instructions
HUDSON 8 12. ISP Instruction (1). Install the program software First decompressing files , as follow:...
Page 54 HUDSON 8 b. Double – click , start to install as follows:...
Page 55 HUDSON 8...
Page 56 HUDSON 8...
Page 57 HUDSON 8 c. There will be a shortcut key appears on the desktop. (2). Connect the ISP board as follow: Connect to the Connect to Philips 190B8 the PC LPT a. Double-click ，running the program as follows:...
Page 58 HUDSON 8 b. Click icon, search the program” PHILIPS_190B_HSD_HSD190MEN3_1.00.hex”, and click open:...
Page 59 HUDSON 8 c. Click icon, the writer is in processing… d. Until appears the follow Fig, writer completed.
Page 60: Ddc Instructions
HUDSON 8 13. DDC Instruction General DDC Data Re-programming In case the main EEPROM with Software DDC which store all factory settings were replaced because a defect, repaired monitor’ the serial numbers have to be re-programmed. It is advised to re- soldered the main EEPROM with Software DDC from the old board onto the new board if circuit board have been replaced, in this case the DDC data does not need to be re-programmed.
Page 61 HUDSON 8...
Page 62 HUDSON 8...
Page 63 HUDSON 8...
Page 64 HUDSON 8 Click to complete the installation. Note: After installation, you must restart the PC to take the setup to effect.
Page 65 HUDSON 8 2. Install the “WinDDC_ setup” Second, you must install the . The processing as follows:...
Page 66 HUDSON 8...
Page 67 EDID, Connect this port to the Philips 190B8’s When you write digital VGA port EDID, Connect this port to the Philips 190B8’s DVI port 12V Input Note: Pin5 of the VGA cable which connects to the monitor should be cut off.
Page 68 HUDSON 8 4. Take analog DDC write for example, as follow a. Double-click ，appear as follow Figs：...
Page 69 HUDSON 8 b. Click c. Key 14 numbers in the Serial Number blank, then click “OK”. Now analog DDC Write completes, as follow. Note: The way of digital DDC write is the same as analog DDC write.
Page 70 HUDSON 8 190B8 EDID Analog 128 bytes EDID Data (Hex): 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 00 FF FF FF FF FF FF 00 41 0C 5A 08 01 01 01 01 16: 15 11 01 03 0E 26 1E 78 2A A1 50 A3 57 4C 9D 25 32: 11 50 54 BF EF 80 71 4F 81 40 81 80 01 01 01 01 48: 01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70...
Page 71 Detailed Timing: 1280x1024 @ 60Hz. <-x-Detailed Timing Descriptions-x-> <---Detailed Timing Descriptions---> Detailed Timing: FF (Monitor SN) '123132132132' Detailed Timing: FC (Monitor Name) 'Philips 190B' Detailed Timing: FD (Monitor limits) Min. V. rate: 56Hz Max. V. rate: 76Hz Min. H. rate: 30KHz Max.
Page 72 HUDSON 8 190B8 EDID Digital 128 bytes EDID Data (Hex): 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 00 FF FF FF FF FF FF 00 41 0C 5A 08 01 01 01 01 16: 15 11 01 03 80 26 1E 78 2A A1 50 A3 57 4C 9D 25 32: 11 50 54 BF EF 80 71 4F 81 40 81 80 01 01 01 01 48: 01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70...
Page 73 Detailed Timing: 1280x1024 @ 60Hz. <-x-Detailed Timing Descriptions-x-> <---Detailed Timing Descriptions---> Detailed Timing: FF (Monitor SN) '312231232312' Detailed Timing: FC (Monitor Name) 'Philips 190B' Detailed Timing: FD (Monitor limits) Min. V. rate: 56Hz Max. V. rate: 76Hz Min. H. rate: 30KHz Max.
Page 74: White Balance, Luminance Adjustment
HUDSON 8 14. White Balance, Luminance Adjustment 1. Apparatuses and program: analyzer CA-210, PC, tool, FGA adjustment program (FGAWB0.15SN), Pattern generator. 2. Equipment installation: a. Connect analyzer CA-210 to PC by USB connector, install drive program CA-SDK Ver4.00 for CA-210 and restart PC after finish installing.
Page 75 HUDSON 8 4. Color Temp confirmation Connect the signal to the monitor, the monitor display white-picture, use CA-210 to measure the Color Temp of the screen center and select the OSD to make sure whether the Color Temps accord with the SPEC.
Page 76: Monitor Exploded View
HUDSON 8 15. Monitor Exploded View...
Page 77: Recommended & Spare Parts List
HUDSON 8 16. Recommended & Spare Parts List Recommended Parts List 190B8CB/69 Item Location Part No. Description Philips 12NC 996510005732 FQ024 KEPC7QBB KEY BOARD FQ001 078G 311 9 L SPK 16OHM 2.5W NEOSONICA 996500037296 FQ002 078G 311 9 R SPK 16OHM 2.5W NEOSONICA...
Page 78 HUDSON 8 U304 056G 56327A IC AP1117E18LA SOT223-3L ANACHIP 996510005698 U204 056G1133 56 M24C16-WMN6TP 996500037783 U203 705GQ756006 MCU ASS'Y 996510005729 U601 056G 616 24 TPA6030A4PWPRG4 996500037316 U811 056G 608 10 IC OZ9938GN-B SOIC-16 996500036059 IC902 056G 139 3A PC123Y22FZOF 996500036055 IC902 056G 139 3B PC123 Y82FZ0F...
Page 79 HUDSON 8 Spare Parts List Service Kit Description Part No. Philips 12NC Remark DDC Kit 715L2005C2 9965 000 43197 for all model OSD SN Kit 715GT033 C 9965 000 43252 for all model for all hudson 7 NOVATEK ISP Kit...
Page 80 HUDSON 8 Accessory and Mechanical Location Part No. Description Philips 12NC FQ001 078G 311 9 L SPK 16OHM 2.5W NEOSONICA 996500037296 FQ002 078G 311 9 R SPK 16OHM 2.5W NEOSONICA 996500037297 E089A 089G 728HAA 21 SIGNAL CABLE 996510005679 E089B 089G179J30H564...
Page 81 HUDSON 8 Board Parts Location Part No. Description Philips 12NC FQ021 CBPC7HNAPHQB1 SCALER BOARD (HSD) 996510005692 FQ022 CBPC7GNAPHQB1 SCALER BOARD (LG) 996510005693 C101 065G0402104 12 CHIP 0.1UF 50V X7R 996510005716 C102 065G0402104 12 CHIP 0.1UF 50V X7R 996510005716 C103 065G0402104 12 CHIP 0.1UF 50V X7R...
Page 82 HUDSON 8 C210 065G0402104 12 CHIP 0.1UF 50V X7R 996510005716 C213 065G060310517T MLCC 0603 CAP 1UF Z 16V Y5V 996510005722 C214 067G305V101 3 105C 10UF +-20% 16V 996510005694 C215 065G0402104 12 CHIP 0.1UF 50V X7R 996510005716 C216 065G0402104 12 CHIP 0.1UF 50V X7R 996510005716 C219 065G0402220 31...
Page 83 HUDSON 8 Q201 057G 417 13 T KEC 2N3906S-RTK/PS 996500035967 Q301 057G 417 12 T KEC 2N3904S-RTK/PS 996500036961 Q302 057G 763 1 A03401 SOT23 BY AOS(A1) 996500035968 Q305 057G 417 12 T KEC 2N3904S-RTK/PS 996500036961 Q402 057G 417 13 T KEC 2N3906S-RTK/PS 996500035967 Q403...
Page 84 HUDSON 8 R144 061G0402102 RST CHIPR 1 KOHM +-5% 1/16W 996510005702 R201 061G0402105 RST CHIPR 1MOHM +-5% 1/16W 996510005703 R202 061G0402103 RST CHIPR 10 KOHM -5% 1/16W 996500044984 R206 061G0402472 RST CHIPR 4.7 KOHM +-5% 1/16W 996510005711 R211 061G0402000 RST CHIPR 0 OHM +-5% 1/16W 996510005699 R213 061G0402472...
Page 85 HUDSON 8 U204 056G1133 56 M24C16-WMN6TP 996500037783 U301 056G 563 52 IC AP1117D33LA TO252-3L ATC 996510005697 U304 056G 56327A IC AP1117E18LA SOT223-3L 996510005698 X201 093G 2251B MXS12.000AC20F-KAB5 HC-49/US 996510005696 CN101 088G 35315F H D-SUB 15PIN 996500035960 CN102 088G 35424F N DVI 24PIN CONN F 996510005695 FB101...
Page 86 HUDSON 8 C613 065G0603474 17 CHIP CAP.CER 0.47UF -20% -80% 996500037326 C614 065G0603472 32 CHIP 4700PF 50V X7R 996500037325 C615 065G0805105 37 CHIP 1UF 50V Y5V 996500037327 C616 065G0603224 17 CAP:CER 0.22UF-20%-80% 10V SM 996500037324 C617 065G0603474 17 CHIP CAP.CER 0.47UF -20% -80% 996500037326 C618 065G0805105 37...
Page 87 HUDSON 8 FB606 071G 56K121 CHIP BEAD 996500035993 FB607 071G 56K121 CHIP BEAD 996500035993 FB608 071G 56K121 CHIP BEAD 996500035993 ZD601 093G 6021652T DIODE 1N5819 WILLAS 996500037317 FQ024 KEPC7QBB KEY BOARD 996510005732 077G 600 1GCJ TACT SWITCH 996510002796 077G 600 1GCJ TACT SWITCH 996510002796 077G 600 1GCJ...
Page 88 HUDSON 8 C802 065G 3J5096ET 5PF 5% SL 3KV 996500036941 C803 065G 3J5096ET 5PF 5% SL 3KV 996500036941 C806 065G 6J1006ET 10PF 5% SL 6KV 996500036942 C807 065G 3J5096ET 5PF 5% SL 3KV 996500036941 C808 065G 3J5096ET 5PF 5% SL 3KV 996500036941 C811 065G0805105 22...
Page 89 HUDSON 8 C917 065G0805334 22 0.33UF -10% 25V X7R 0805 996500036074 C920 065G 1K102 5T 1000PF/1KV 996500036999 C927 067G 3056804KT ELCAP 68UF M 25V 105_KINGNIC 996500037001 C931 065G517K332 2T 3.3NF 500V 996500037000 C932 067G215S102 4K ED1000UF 25V 996500036946 C933 067G215S102 4K ED1000UF 25V 996500036946 C936...
Page 90 HUDSON 8 L951 073G 253902 H IND CHOKE 0.8uH MIN DADONG 996500040058 L951 073G 253902 T CKOLE COIL 0.8uH 996500036948 L955 073G 253902 T CKOLE COIL 0.8uH 996500036948 IND CHOKE 0.8uH MIN TOP L955 073G 253902 YS 996500040060 NATION L955 073G 253902 S IND CHOKE 0.8uH TAICHANG 996500040059...
Page 91 HUDSON 8 R835 061L0805100 2F CHIP 10K OHM 1/8W 1% 996500036020 R836 061L0805100 2F CHIP 10K OHM 1/8W 1% 996500036020 R837 061L0805752 CHIP 7.5K OHM 1/10W 996500036981 R839 061G212Y625 KT MGFR 6.2MOHM -5% 1/2W 996500036083 R842 061L0805100 CHIPR 10 OHM -5% 1/10W 996500036012 R843 061L0805100...
Page 92 HUDSON 8 R916 061L0805152 CHIPR 1.5K OHM -5% 1/10W 996500036970 R917 061L0805333 CHIP 33KOHM 1% 1/8W 996500036977 R918 061L1206000 CHIPR 0 OHM -5% 1/8W 996500036067 R920 061G152M208 64 0.20 OHM 2W 996500036940 R923 061L0805123 CHIP 12KOHM 1/8W 996500036968 R926 061L1206000 CHIPR 0 OHM -5% 1/8W 996500036067 R927...
Page 93 HUDSON 8 PT802 080GL19T 8DN1 X'FMR DARFONTK.2006M.101 996500036093 RJ801 061L0805000 CHIPR 0OHM -5% 1/10W 996500035984 RJ804 061L1206000 CHIPR 0 OHM -5% 1/8W 996500036067 RJ827 061L0805000 CHIPR 0OHM -5% 1/10W 996500035984 ZD874 093G 39S 24 T RLZ 5.6B LLDS 996500036079 ZD951 093G 39A3552T ZENER DIODE P6KE8.2A ZOWIE 996500037007...
Page 94: Different Parts List
HUDSON 8 17. Different Parts List Diversity of 190B8CS/00 compared with 190B8CB/69 190B8CS/00 190B8CB/69 Location Part No. Description Philips 12NC Part No. Description Philips 12NC E089C 089G404A18N YH POWER CABLE 089G410A18N IS POWER CORD 996500037340 FQ005 705GQ9K0S34VO1 BASE ASSY 705GQ9K0S34VB1...
Page 95 HUDSON 8 Diversity of 190B8CB/75 compared with 190B8CB/69 190B8CB/75 190B8CB/69 Location Part No. Description Philips 12NC Part No. Description Philips 12NC E089C 089G412A18NIS3 POWER CORD WALL-OUT 996500037345 089G410A18N IS POWER CORD 996500037340 LED1 081G 12 1F GP LED GP32032M/R003-ZY-33 996500036001...
Page 96: General Product Specification
MECHANICAL CHARACTERISTICS 5.1 COSMETIC PHILIPS ID 5.2 MECHANICAL DATAFILES PROE FILES REQUIRED 5.3 LOCATION OF PHILIPS LOGO PER PHILIPS MAKE-UP SHEET 5.4 GAP BETWEEN PANEL AND FRONT BEZEL <0.8 (TYP) MM 5.5 LOCATION OF CONTROL ICONS PER PHILIPS GRAPHIC SHEET 5.6 COLOR FOR RESIN/PAINT...
Page 97 6.3 DISPLAY DISTURBANCES FROM EXTERNAL ENVIRONMENT 6.4 DISPLAY DISTURBANCES TO EXTERNAL ENVIRONMENT RELIABILITY 7.1 MEAN TIME BETWEEN FAILURES QUALITY ASSURANCE REQUIREMENTS 8.1 ACCEPTANCE TEST PHILIPS’ FLAT PANEL MONITORS PIXEL DEFECT POLICY REGULATORY COMPLIANCE 10.1 WORLDWIDE REGULATORY 10.2 EMC REQUIREMENTS 10.3 ROHS 10.4 WEEE...
Page 98: Foreword
30 minutes that brightness stability is optimal, and follow strictly after panel specification. 2. PRODUCT PROFILE This display monitor unit is a color display monitor enclosed in PHILIPS styling cabinet which has an integrated tilt/ high adjustment base. 2.1 LCD Priority : 1.
Page 99: Scanning Frequencies
View angle (CR>10) : >=160/160 (typ) for H/V Contrast ratio : >=1000:1 (typ) White luminance : >=300 nit (typ) Color gamut : >=72% (typ) Gate IC Source IC Response time : 5 ms 2.2 Scanning frequencies Hor. : 30 – 83 K Hz Ver.: 56 - 76 Hz Video dot rate: 165 MHz Power input: 90-264 V AC, 50/60 ±...
Page 100: Interface
HUDSON 8 3.2 Interface 3.2.1 D-Sub Cable Length : 1.8 M +/- 50 mm Connector type : D-Sub male with DDC2B pin assignments. Blue connector thumb-operated jack screws Pin No. Signal Green/ SOG Blue Sense (GND) Cable Detect (GND) Red GND Green GND Blue GND DDC +3.3V or +5V...
Page 101: Timing Requirement
Pin Assignment: Pin No. Description T.M.D.S. data2- T.M.D.S. data2+ T.M.D.S. data2 shield No Connect No Connect DDC clock DDC data No Connect T.M.D.S. data1- T.M.D.S. data1+ T.M.D.S. data1 shield No Connect No Connect +5V Power Ground (for +5V) – Cable detect Hot plug detect T.M.D.S.
Page 102 HUDSON 8 3.3.1 Mode storing capacity Factory preset modes : 11 Preset modes : 45 User define modes : 12 Note: 1. Screen displays perfect picture at 11 factory-preset modes. 2. Screen displays visible picture with OSD warning when input modes are the 45 preset modes. 3.3.2 Factory preset modes (11 modes) Factory modes and preset modes are defined in the enclosed timing table file.
Page 103 75.171 VESA 1280x960 75.021 129.895 63.981 VESA 1280x1024 60.02 71.691 SUN WS 1280x1024 67.189 76.754 DOS/V 1280x1024 72.001 129.56 79.976 VESA 1280x1024 75.025 81.13 SUN WS 1280x1024 76.107 91.146 VESA 1280x1024 85.24 157.5 44.772 1280x720 59.855 74.5 56.456 1280x720 74.777 95.75 CVT-reduced 64.744...
Page 104: Horizontal Scanning
HUDSON 8 OSD Tree 3.4 Horizontal scanning Sync polarity : Positive or Negative Scanning frequency : 30 – 83 K Hz 3.5 Vertical scanning Sync polarity : Positive or Negative Scanning frequency : 56 - 76 Hz...
Page 105: Power Input Connection
3.12 EDID Data for EDID & .inf file 1 User visible strings on .inf file Philips 190B (19inch LCD MONITOR 190B8) 2 Manufacturer ID ( EDID data) 3 Product ID, "xxxx" 4 codes MSB(byte 12): 08 LSB (byte 11): 5A...
Page 106: Smart Contrast (Dynamic Contrast Ratio)
HUDSON 8 DCR function ON , contrast ≧ 2X original contrast specification. 3.15 Smart contrast (Dynamic contrast ratio) Smart Contrast is a kind of dynamic backlight control. This function changes the panel backlight dynamically according to the frame brightness histogram. The contrast ratio is 3000:1 (typical). 3.16 Smart Image 3.16.1Smart Image OSD outlook 3.16.1.1 Position...
Page 107 3.16.1.5Linkage between Smart Image OSD and main OSD A. Settings within main OSD have linkage with Smart Image OSD. Brightness Contrast iii. Color Temperature B. Because each preset profiles will define default setting of these 3 parameters. Users can understand what is the value of that in preset profile by open the main OSD.
Page 108 HUDSON 8 6. SmartResponse set to “High”.(N/A for this model) 7. Gamma Table turn off to achieve 8. Fastest response time. (N/A for this model) 9. Smart Contrast set to “On” C. Image Viewing i. Purpose: Design for image viewing application, especially in slide show. The screen is dominated by picture.
Page 109: Smart Response (Not Required For This Product)
C. The demo profile will be “entertainment profile setting. D. Hot keys to trigger: Press [SmartImage] 3 seconds or more to trigger the demo mode. When demo mode is On, press 3 seconds or more to turn off the demo mode. When the demo mode is enabled, the blue LED will flash until demo mode disabled.(N/A for this model) 3.17 Smart Response (Not required for this product)
Page 110: White Color Adjustment
HUDSON 8 4.6 White color adjustment There are seven factory preset white color 11500K, 9300K, 8200K, 7500K, 6500K, sRGB, 5000K Apply full gray64 pattern, with brightness in 100 % position and the contrast control at 50 % position. The 1931 CIE Chromaticity (color triangle) diagram (x ,y) coordinate for the screen center should be: Product specification CIE coordinates (x,y)
Page 111: Mechanical Characteristics
5.1 Cosmetic - Philips ID 5.2 Mechanical data files - ProE files required 5.3 Location of Philips logo - Per Philips make-up sheet 5.4 Gap between panel and front bezel < 0.8 (typ) mm 5.5 Location of Control icons - Per Philips Graphic sheet 5.6 Color for resin/paint -...
Page 112: Plastics Flammability
(bezel, back cover, base). Plastic resin type selection should be referred to “TY R83-2-9002-1”s. 5.11 Texture/Glossing of housing The texture area and texture no should follow Philips make-up sheet. The exterior surfaces shall have a uniform texture. Philips must approve the mold texturing.
Page 113: Product Dimension/Weight (Prefer To Sht 191)
5.15 Product dimension / Weight (Refer to SHT 191 ) Unit dimension : 422 mm (W) * 410.5 mm(H) * 198.8 mm(D) Packed unit dimension : 503 mm(W) * 198mm(H) * 507mm(D) for WW : 513mm(W) * 208mm(H) * 517mm(D) for China Net weight : 6.1 Kg (Including I/F cable 300g) Gross weight...
Page 114: Pallet/Container Loading
HUDSON 8 5.17 Pallet / Container loading Transportation standards refer to TYE-M0002. Air shipment - Sea container 20'(pallet/slip sheet) Sea container 40'(pallet/slip sheet) Sea container 40' High Cube (pallet/slip sheet) Truck shipment- Transportation request for all region except China/India A. Air shipment B.
Page 115: Acceptance Test
Control II level AQL: 0.4 (major) 1.5 (minor) (Please also refer to annual quality agreement) Customer acceptance criteria: UAW0377/00 9. Philips’ Flat Panel Monitors Pixel Defect Policy Philips’ Flat Panel Monitors Pixel Defect Policy BRIGHT DOT DEFECTS ACCEPTABLE LEVEL MODEL...
Page 116 HUDSON 8 Fig 1: Measurement locations of Brightness Uniformity Fig 2: Cross talk pattern Gray level 46 (64 Gray level) Fig 3: Cross talk Pattern Center at Gray level 0 (Black)
Page 117 SEPARATE SYNC. VIDEO HORIZONTAL VIDEO VERTICAL COMPOSITE SYNC. VIDEO HORIZONTAL FIG-4 TIMING CHART -1...
Page 118: Regulatory Compliance
HUDSON 8 10. REGULATORY COMPLIANCE 10.1 Worldwide Regulatory Domain Safety / EMC / Ergonomics / Standards Documents Country CB Report IEC60950-1:2001. Group -and national differences International and CB of all countries listed in CB Bulletin No. 107A certificate European Low Voltage Directives 73/23/EEC and Declaration of 93/68/EEC Conformity...
Page 119 Certificate of South Africa SABS IEC 60950 Conformity UL 60950-1: 2003 UL certificate FCC Part 15 Class B FCC ID grant Energy Star registration CSA C22.2 No 60950 CSA certificate Canada Statement on ICES-003 issue 3 label Mexico NOM-019-SCFI-1994 certificate Korean Safety Control law IEC 60950 eK certificate Korea...
Page 120: Emc Requirements
10.2 EMC Requirements Supplier DVT EMI test result must be submitted prior to DVT samples delivery, and PVT EMI test result must be submitted again prior to PVT samples delivery, which also has to meet Philips' immunity testing specification. 10.3 RoHS Restriction on the use of certain hazardous substances.

This manual is also suitable for:

190b8cs/27 190b8cb/69 190b8cb/75 190b8cb/27

Philips 190B8CS/00 Service Manual

Service

96 18. General Product Specification

Quick Links

Chapters

Related Manuals for Philips 190B8CS/00

Summary of Contents for Philips 190B8CS/00

This manual is also suitable for:

Table of Contents