Connection - Panasonic Diga DMR-ES15EB Operating Instructions Manual

Connection

Use of the supplied RF coaxial leads
To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial leads when you connect this unit
to your TV and aerial outlet or aerial lead, as shown in connection types A-C.
• Keep the RF coaxial leads as far away as possible from other leads.
• Do not roll up the RF coaxial leads.
• Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions.
Be sure to read the Caution for AC Mains Lead on page 2.
• Choose from one of the connection types A-C that suits your requirement.
Connecting to a television only
Using a fully wired 21-pin Scart lead
• You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (
• You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
Required setting
"AV1 Output" in the Setup menu (
Television's rear panel
Use one of the RF coaxial lead (black or grey) to connect this unit's RF IN terminal to your aerial socket or aerial lead.
To the aerial
Connecting a terminal other than the 21-pin Scart terminal (Ô page 11).
After completing the above connections, proceed to the TV Tuning (Ô page 12).
RQT8320
8
page 40)
Ô
VHF/UHF
RF IN AV IN
RF coaxial lead
(included, black)
To household mains socket
Fully wired 21-pin
Scart lead
(For Q Link functions)
RF coaxial lead (included, grey)
or
RF coaxial lead (included, black)
page 38).
Ô
To household mains socket
(AC 220 V to 240 V, 50 Hz)
AC mains lead
(included)
Connect only after all other
connections are complete.
This unit's rear panel
This unit