Advertisement
4 | equIP Series S Cameras 3-Inch/4-Inch Minidome Camera Wall Mounts Installation Guide
4.
5.
6.
Attaching the Pendant Mount to the Pendant Arm
1.
2.
www.honeywell.com/security
Thread the RJ45/PoE ethernet cable through the pendant arm.
Figure 6
Threading the Ethernet Cable Through the Pendant Arm
Use appropriate screws (not supplied) to securely fasten the pendant arm to the wall.
Install the pendant arm cover plate on the pendant arm. Slide the tab into the hole on the
pendant arm, then lay the cover flush with the pendant arm's surface. Use the M3x9.5 P
Head Mechanical Screw to secure the cover in place.
Thread the ethernet cable through the conduit entry on the pendant mount.
Figure 7
Threading the Ethernet Cable Through the Camera Pendant Mount
Align the pendant mount with the pendant arm, and screw the pendant mount securely
into place.
Advertisement
