Advanced Setting; Parameter Settings - Boskon Guard BG-520 Series Instruction Manual

3.1) Parameter Settings

This chapter explains the advanced operations for customizing the camera settings. The settings
can only be customized in TEST mode and there are two ways are available to customize the
camera settings. Including: Remote control and Parameters Setup EXE file Storage on CD
Disk. (Please reference 3.5 Set up Camera/MMS ON PC)
Following will introduce how to customize the camera settings by remote control:
Press "MENU" Key to Enter/Exit the menu, Press
Press ,
Parameter
Mode
Photo Size
Video Size
Video Length
Set Clock
Interval

ADVANCED SETTING

to change the setting.
Settings (Bold=Default)
Camera
Video
Camera+Video
12M Pixel
8M Pixel
5M Pixel
1080P
720P
VGA
10sec
20sec
30sec
MM/DD/YY - HH:MM:SS
DD/MMS/YY-HH:MM:SS
YY/MM/DD-HH:MM:SS
ON
(Optional from 1Sec to
60Min)
, , to move the marker,
Description
Select which Mode you would like to
use. In Camera+video mode, the camera
will first take a picture and then start to
record Video immediately.
Selects resolution for still photos from 5
to 12 megapixels, Higher resolution
produces better quality photos, but
creates larger files that take up more of
the SD card capacity. 5M is a good
compromise between quality and file size
Selects video resolution,
resolution produces better quality videos,
but creates longer files that take up more
of the SD card capacity. 1080P and 720P
are high definition video format.
Sets length per captured video clip,
settings begin with 10 second, 10sec is
Default value. All videos are in AVI
format that can be played in most of
media players
Press "OK" to setup date and Time (the
Date format can be switchable)
Select the length of time that the camera
will wait from when the last picture was
taken and written in the SD card, until it
higher