Boskon Guard BG-520 Series Instruction Manual page 10

Image Burst
Beep
Sense Level
Time Stamp
Playback
Multi-Timer
OFF
Optional from 1 photo to 5
photo
ON/OFF
Medium/Low/High
ON/OFF
ON/OFF
H:M—H:M
H:M—H:M
H:M—H:M
H:M—H:M
responds to any new triggers from the
PIR sensor. During the selected interval,
the camera will not take pictures/videos.
This prevents the SD card from filling up
with too many redundant images. (Note:
when your turn on Interval, the
camera can also sending mms or SMS)
Selects how many photos are taken in
sequence per trigger in camera mode.
Selects ON if you want voice when setup
the camera by remote control
Selects the sensitivity of the PIR sensor.
The " High" setting will make the camera
more sensitive to infrared (heat) and
more easily triggered by motion, and the
"Low" setting makes it less sensitive to
heat and motion. The High setting can be
useful when the ambient temperature is
warm( making it more difficult for the
sensor to detect animals), and the Low
setting may help in cold weather if often
by anything warmer
surroundings
Select "On" if you want the Date & Time
(that the photo was captured) imprinted
on every photo, select "Off" for no
Imprint
Press " OK" to Playback Pictures/Videos
on 2inch HD Display, Press "Right
Arrow" to Delete video or picture, Press
Left button to Play video, Press Up and
Down to adjust the Volume or change
picture and Video.
Select on if you want the camera working
in specified time everyday, our camera
allow user to setup four different
specified time each day. Each different
time should be not overlap with other
different time outside the time period the
camera will not be triggered or take any
photos/videos this features can be used
together with Time Lapse function.
than the