Boskon Guard BG-520 Series Instruction Manual page 17

MMS. However, because each local Mobile network operator has their own settings for their
MMS service, and those settings can change sometimes, you may need to acquire the settings
from your Mobile network operator if the Auto-selected settings fail to work. If you find out those
settings have changed according to the information provided by your Mobile Network, or you
have settings from your Mobile network that is not on our Operators list, please notify us so we
can update our program.
Click on
directory of the SD card (You need to insert the SD card in the SD card reader and plug it in your
computer.) Then, click on
in the directory you just selected. If you selected a directory other than the SD card, you need to
move the file to the root directory of the SD card before inserting the SD card in the camera later
on. (Caution: Please don't try to change the file name that already generated, otherwise
your camera will can't be setup as desired)
Click on Exit to exit the MMS Setup interface. Retrieve the SD card and insert it in the camera.
Switch to the TEST position to enter the TEST mode. A message will show up on the TFT display,
indicating the MMS function has been successfully set up. Congratulations! You camera is all set
to send color pictures to your cell phone and/or email account every time it is triggered.
NOTES: Please Pay an attention to the following notes to make sure the mms picture sending
correctly.
Ø
The camera is ON and functions. The SD card has enough space. 8 AA batteries with enough
power capacity.
Ø
SIM card is installed. The MMS service is activated (some MMS services need pre-paid
balance in the account.) The SIM card is not password-protected.
Ø
The signal is strong in the field. The recipient phone number or email account is entered
correctly. You are suggested to take the receiving phone with you and do the
send-and-receive test on site.
Ø
MMS parameters are set correctly.
Ø
The Timer function is OFF. If you have the Timer ON, make sure you are in the specified
time period when expecting incoming MMS pictures.
Ø
The camera is stationary while sending MMS pictures.
to choose the directory to save the settings, usually under the root
. A file named MMSSetup will be created and saved