Cleaning And Disposal; Troubleshooting - Conrad Electronic 85 59 17 Operating Instructions Manual

Cleaning and disposal

Clean the outer sensors regularly to avoid malfunctioning. Clean the display with a clean, damp and lint-
free cloth without abrasive of chemical cleaners.
Electronic products are raw material and do not belong in the household waste. When
the device has reached the end of its service life, dispose of it in accordance with the
current statutory regulations at the communal collection points. Disposal in the dome-
stic waste is not permitted.

Troubleshooting

In purchasing this parking aid, you have acquired a product which has been designed with state-of-the-
art technology and is operationally reliable.
Nevertheless, problems or faults may occur.
For this reason, the following is a description of how you can eliminate possible malfunctions yourself.
Please always observe the safety instructions!
Error
Parking aid
does not turn on.
The display shows wrong
distance values and a
signal sounds although
there is sufficient space.
Possible cause
No ignition voltage available.
The reverse gear is not engaged. Engage the reverse gear.
Wrong cabling.
The fuse is defect.
„Program error"
The sensors are dirty.
Repairs other than those described should only be carried out by an
authorised specialist.
Solution
Switch the ignition on.
Check the plug connec-
tions and the flat fuse
of the voltage supply.
Turn the ignition off and
start the vehicle again (reset).
Clean the sensors regularly.
25