Toyota Sienna 2007 Owner's Manual page 57

NOTICE
Do not apply excessive force when
the back door is operated automati-
cally. Otherwise, the power back door
system may be damaged.
07 SIENNA_U (L/O 0612)
OPERATING WITH THE POWER BACK
DOOR SWITCH
To open the door, push and hold the
" " switch on the overhead con-
sole about one second. To close the
door, push this switch once again. The
door opens and closes completely.
Opening operation can be performed by
the switch under the following condi-
tions:
D
The back door is unlocked.
D
The power back door system is on.
(The "BACK DOOR OFF" switch is
pushed out.)
D
The back door is between in the fully−
closed position and half−opened posi-
tion.
D
When the ignition key is in the "ON"
position, the transmission selector lever
must be in "P".
Closing operation can be performed by
the switch under the following condi-
tions:
D
The power back door system is on.
(The "BACK DOOR OFF" switch is
pushed out.)
D
The back door is between in the fully−
opened position and half−opened posi-
tion.
The time of pushing the switches for oper-
ating the back door can be changed. For
details, contact your Toyota dealer.
2007 SIENNA from Oct. '06 Prod. (OM45437U)
39