Windshield wipers and washer
To turn on the windshield wipers, move
the lever to the desired setting.
The key must be in the "ON" position.
Lever position
Speed setting
Position 1
Intermittent
Position 2
Slow
Position 3
Fast
For a single sweep of the windshield,
push the lever up and release it.
07 SIENNA_U (L/O 0612)
With interval adjuster: The band lets you
adjust the wiping time interval when the
wiper lever is in the intermittent position
(position 1). Twist the band upward to
increase the time between sweeps, and
downward to decrease it.
To squirt washer fluid, pull the lever
toward you.
If the windshield wipers are off, they will
operate a couple of times after the washer
squirts.
For instructions on adding washer fluid,
see "Adding washer fluid" on page 503 in
Section 7−3.
In freezing weather, warm the windshield
with the defroster before using the washer.
This will help prevent the washer fluid
from freezing on your windshield, which
can block your vision.
NOTICE
Do not operate the wipers if the wind-
shield is dry. It may scratch the
glass.
When waxing your vehicle, make sure that
the
washer
nozzles
do
not
become
blocked. If a nozzle becomes blocked,
contact your Toyota dealer to have the
vehicle serviced.
NOTICE
If a nozzle becomes blocked, do not
try to clear it with a pin or other
object. The nozzle will be damaged.
183
2007 SIENNA from Oct. '06 Prod. (OM45437U)