Circuit Descriptions, Abbreviation List, And Ic Data Sheets - Philips TCM2.0E Service Manual

Table of Contents

Advertisement

EN 74
9.
TCM2.0E LA

9. Circuit Descriptions, Abbreviation List, and IC Data Sheets

Index of this chapter:
9.1 Introduction
9.2 Block Diagram
9.3 Abbreviation List
9.4 IC Data Sheets
9.1
Introduction
This chassis is a digital derivative from the TCM1.0E LA
chassis and supports DVB-T reception. It uses the Mediatek
MT5335 main chip. It processes the following input/output
signals:
Analog and digital RF signals (PAL B/G, D/K, I, SECAM B/
G, D/K, L/L', DVB-T)
SCART input signals (CVBS & RGB)
CMP input signals (YPbPr)
VGA input signals
HDMI input signals, v1.2 compliant, with HDCP, audio
included as EIA-861B standard
S-Video input
Headphone output
SPDIF output.
9.2
Block Diagram
Circuit Descriptions, Abbreviation List, and IC Data Sheets
Figure 9-1 Block diagram
Notes:
Only new circuits (circuits that are not published recently)
are described.
Figures can deviate slightly from the actual situation, due
to different set executions.
The platform is also designed for the lowest power
consumption in off/stand-by mode (<0.3W) to fulfil new Philips
CE environment policy requirement.
The MT5335 is surrounded by a tuner, a video demodulator, a
HDMI interface, SDR and flash memory, an audio amplifier,
and optionally a stand-by microprocessor (26"). For the smaller
set versions also the inverter board is serviceable.
For the block diagram, refer also to chapter 6 "Block diagrams,
Test Point Overviews, and Waveforms".
I_17951_012.eps
060808

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents