Radio; Usb/Aux; Radio & Usb/Aux; Receiving Preset Stations - Pioneer MVH-290BT Owner's Manual

Menu Item Description
SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
[YES], [NO]
(Some of the settings may be retained even after
resetting the unit.)

Radio

The RDS (radio data system) function only works in areas that broadcast RDS
signals for FM stations.

Receiving preset stations

1
Press SRC/OFF to select [RADIO].
2
Press BAND/DIMMER to select the band from [FM1], [FM2], [FM3] or
[AM].
3
Press a number button (1/
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to
[PCH] in the FUNCTION settings (page 11).
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
6
En
to 6/ ).
To seek a station manually
1
After selecting the band, press
Press and hold
Scanning stops when the unit receives a station. To cancel seek tuning,
press /
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 11).
To store stations manually
1
While receiving the station you want to store, press and hold one of the
number buttons (1/

USB/AUX

Playing back
Disconnect headphones from the device before connecting it to the unit.
SRC (source)/OFF
to 6/ ).
M.C. (multi-control) dial
/ to select a station.
/ then release to seek an available station.
.
to 6/ ) until it stops flashing.
AUX input jack (3.5 mm stereo jack)
USB port