Laser Pegs 12 in 1 Animals Construction Set Model Instructions

Please read this manual before you begin!
Failure to follow this manual's instructions may
result in damage to the Triangle Power Base, AC
ANIMALS
Adapter and/or Laser Pegs®. Not adhering to
these instructions will void the manufacturer's
Ages 5 +
warranty. The packaging must be kept because
it contains important information.
12 Models+
WARNING:
CHOKING HAZARD
ANY CREATION YOU CAN BUILD - Small parts.
LIGHT UP Not for children under 3 yrs.
Do not submerge in water.
CONSTRUCTION SET INCLUDES:
• 20 Laser Pegs®
• 102 Construction Parts
- Laser Pegs® Peg Cord
• Triangle Power Base
• Instruction Manual
Construction Compatible
Requires 3-AA Batteries
Compatible with other construction kits
Batteries NOT
EN71, RoHS COMPLIANT
Included
This product complies to
all safety requirements
of ASTM F 963
MODEL INSTRUCTIONS
All additional model instructions can
be downloaded at www.LaserPegs.com
Laser Pegs® Parts List
There is No LED In The 90 Degree Peg
x1 45° PEG
TRIDENT PEG
x2
SQUARE
SQUARE x3 STRAIGHT
x2
x1
PEG
x1 x2 T-PEG STACKABLE
TRUSS PEG M-M PEG
TRIANGLE PEG
Each Laser Peg® is color coded on the circuit board inside
Color
Code each shape. There is No LED In The 90 Degree Peg.
Laser Pegs ® Stackable
Laser Pegs
® link that Laser Pegs
Sound Activated
allows you to connect to
Peg Cord
Triangle Power Base
other construction kits.
x2 Construction Parts List
x2
x2 x2
x2
x5
x2
x4
x2
x2
x5
x2
x2
x2
x2
x8
x2
x2
x6
x2
x6
x2
x4
x2
x2
x2 x2 x2
www.LaserPegs.com
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. © Copyright 2014 All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures
LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.com

Connecting Pegs

To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and off smoothly. The 90° Pegs are
essential to construction but they DO NOT LIGHT UP.
Environmental Phenomena
* The unit may malfunction if subjected to radio-frequency interference. It SHOULD revert to
normal operation when the interference stops. If not, it may become necessary to turn the power
off and back on, or remove and reinstall the batteries.
* In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory,
requiring the user to reset the devise by removing and reinstalling the batteries.
Push Red
Red
Power Button
Power Button
to turn on/off
Push Red Power Button to
cycle through 4 different
light settings.
AC Adapter
SOUND/ON/FLASH/FLASH FASTER Connection
WARNING: STROBE LIGHTS
MAY CAUSE SEIZURES

Replacing Batteries

1. Remove the three (3) screws.
Remove the 3 Phillips head screws
2. Place three (3) AA batteries in the correct
position - as displayed inside the Triangle
Power Base.
3. Reassemble the Triangle Power Base.
4. Replace the three (3) screws.
5. Push RED Power Button to turn on!
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium,
x4
90° PEG
NiMH) batteries!
8. Exhausted batteries are to be removed
from the Triangle Power Base.
9. Never connect more than 200 Laser Pegs®
10. Non-rechargeable batteries are not to be
recharged.
11. Rechargeable batteries are only to be
x4
recharged under adult supervision.
12. Rechargeable batteries are to be removed
from the toy before being recharged.
13. Batteries are to be inserted with the
correct polarity.
14. The supply terminals are not to be short-
circuited. Remove the three Phillips head
15. DO NOT THROW BATTERIES INTO FIRE!
screws with a 4mm screw driver.
Please dispose of batteries properly as per state and local regulations.
Using an
®
AC Adapt
er
Remove all batteries
from Laser Pegs® power
base before using the
x6
5-volt AC adapter.
x6
*To avoid short-circuits, keep metal objects and
other unauthorized materials from obstructing
x2
the peg holes.
The AC adapter and the Triangle Power Base are to be regularly examined for
x2
damage to the cord, plug, enclosure and other parts, and in the event of such
damage, they must not be used until the damage has been repaired.
x2
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
x2 x2
the reds and yellows) and some won't. When the Laser Pegs® dim the Laser Pegs®
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options...
1. Use a 5-volt AC Adapter –available from www.LaserPegs.com
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!
DO NOT SUBMERGE IN WATER
RHINOCEROS: An endangered, heavy mammal with horns on its nose and thick folded skin whose fossilized
skull was once mistaken for a dragon's. Unfortunately, the Western Black Rhinoceros was declared extinct in
RHINOCEROS
Model
Difficulty
Level
Peg Holes
A
STEP
1
3-AA Batteries
Requires (3AA) Batteries
STEP
2
When using an AC
Adapter, NEVER
place the adapter
plug into the Tri-
angle Power Base
top peg holes.
Never connect more than 200
Laser Pegs® when using a 5-volt
(2000mA) AC Adapter.
Questions? Comments?
For additional compliance info:
Contact: Support@LaserPegs.com
STEP
3
STEP
4
STEP
5
STEP
6
Laser Pegs® CARES
1-866-432-3735
Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.
www.LaserPegs.com
US Patent #7,731,558