Setting Procedures - Panasonic WV-BP550 Operating Instructions Manual

SETTING PROCEDURES

1. Camera Identification (CAMERA ID)
Setting
You can use the camera identification (CAMERA ID) to
assign a name to the camera. The camera ID consists
of up to 16 alphanumeric characters. You can select
whether to have the camera ID displayed on the moni-
tor screen or not.
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
MOTION DET
LENS DRIVE
END SET UP ENABLE
To edit the CAMERA ID
1. Move the cursor to the CAMERA ID parameter.
2. Press . The CAMERA ID menu appears. The
cursor on the letter "0" starts blinking.
OFF
ALC
---
ON
OFF
INT
OFF
DC
-19-
Character Cursor
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
POSI RET END RESET
................
Pointer
CAMERA ID menu
3. Move the cursor to the character you want to
change by pressing
4. After selecting the character, press
selected character appears in the editing area.
(The pointer in the editing area moves to the right
automatically at this moment.)
5. Repeat the steps above until all characters are
edited.
To enter a blank space in the CAMERA ID
Move the cursor to SPACE and press
To edit a specific character in the CAMERA ID
1. Move the cursor to the editing area by pressing
.
Character
Area
Command
Editing
Area
/ / / .
. The
.