Selecting Different Sources For The Front And Rear Monitors-Zone Control - JVC KW-V820BT Instruction Manual

SETTINGS
Selecting different sources for the
front and rear monitors—Zone
Control
You can select different sources for both this unit
and an external monitor connected to the VIDEO
OUT and AV-OUT AUDIO terminals. (Page 61)
1
Display the source/option selection screen.
On the Home screen:
• You can also display the source/option
selection screen by touching [
source control screen.
2
Display the <Audio> screen.
3
Display the <Zone Control> screen.
42
4
Select the source for front and rear, and
adjust the volume for the rear source.
[Zone Select]
] on the
[Front Source]* Selects the source for the
[Rear Source]*
[Rear VOL.]*
• When the rear speaker sound is switched, the
audio source that is output at the AV-OUT AUDIO
terminal is also switched to the same source.
Selects whether different
sources are selected for the
front and rear monitors.
• Dual Zone: Selects
different sources. (The
DUAL indicator lights up.)
• Single Zone: Selects the
same source.
front monitor.
Selects the source for the rear
monitor.
Adjusts the volume for the
rear source.
• When [Zone Control] is set to [Dual Zone],
the following operations/performances are not
available.
– Output from the subwoofer
– Adjustment on the <Graphic Equalizer> screen
(Page 44)
– Adjustment on the <Sound Effect> screen
(Page 48)
– Settings on the <Speaker Select> screen
(Page 43)
– Settings on the <Position/DTA> screen
(Page 45)
• You cannot select iPod if it is connected via
Bluetooth.
• If you select USB, iPod, Disc, Bluetooth audio or
Apple CarPlay as the Front Source, you cannot
select USB or iPod as the Rear Source.
* Selectable only when [Zone Select] is set to [Dual Zone].