How To Install Wireless Remote Controller Receiver - Panasonic S-22MY2E5 (CZ-KPY3) Series Installation Instructions Manual

Vrf system air conditioner – for refrigerant r410a
Hide thumbs Also See for S-22MY2E5 (CZ-KPY3) Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
8. HOW TO INSTALL WIRELESS REMOTE
CONTROLLER RECEIVER
N OT E
Refer to the Operating Instructions attached to the optional Wire-
less Remote Controller Receiver.
9. APPENDIX
■ Care and Cleaning
Switch off the power supply before
CAUTION
cleaning.
CLEANING INSTRUCTIONS
● Do not use benzene, thinner or scouring powder.
● Use only soap ( pH7) or neutral household detergent.
● Do not use water hotter than 40°C.
N OT E
● Clean the filter regularly for best performance and to reduce
power consumption.
● Please consult your nearest dealer for seasonal inspection.
Remove Air Filter
1 Remove the 2 screws with phillips head screwdriver.
Then slide the knob to the OPEN side.
2 Slowly pull
down the intake
grille.
3 Remove the air filter
from the tabs and
pull it downwards.
INDOOR UNIT
Wipe the unit gently
with a soft, dry cloth.
Remove
AIR FILTER
Vacuum, wash and dry.
17
Air Filter Installation
1
Insert the air filter
to the tabs of the
intake grille.
2
3
Slide the knob to the CLOSE side.
Then fix the knobs with screws.
■ Air Filter Maintenance
It is recommended that the air filter be cleaned when
the
(Filter) appears on the display.
Clean the filter frequently for best performance in the
area of dusty or oil spots regardless of filter status.
■ After Cleaning
1. After the air filter is cleaned, reinstall it in its
original position.
Be sure to reinstall in reverse order.
2. Press the Filter reset button.
The
(Filter) indicator on the display goes out.
Filter indicator
Filter reset button
Slowly bring
up the intake
grille.
Knob

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents