Cylinder Head/Cylinder/Piston; Cylinder Head Removal; Cylinder Removal - CPI GTR 50 Service Manual

CYLINDER HEAD/CYLINDER/PISTON

CYLINDER HEAD REMOVAL

Put the right side of vehicle on the ground.
Attention! Please have a protected pad on the proper
location of the ground to avoid crash or damage of
plastic parts.
Remove the spark plug cap.
Remove the exhaust muffler.
Remove the cylinder air shrouds.
Remove the spark plug.
Remove the setting bolts of cylinder head.
Remove the cylinder head.
Cylinder head flatness inspection.
SERVICE LIMIT: 0.05 ㎜

CYLINDER REMOVAL

Remove the cylinder head.
Remove the cylinder.
Remove the cylinder gasket.
NOTE:
Clean all the material of cylinder gasket with
a scraper.
《6-1》
CPI MOTOR
GTR50