Lubrication System; Oil Pump Removal; Oil Pump Inspection; Oil Pump Installation - CPI GTR 50 Service Manual

LUBRICATION SYSTEM

OIL PUMP REMOVAL

Remove luggage box & side covers.
Disconnect the oil tube of oil pump (intake &
output).
Remove the oil pump control cable.
Remove the setting bolt of oil pump.
Remove the oil pump.

OIL PUMP INSPECTION

Check the O-ring, gear & seal for wear or any
damage.
NOTE:
Do not disassembly the oil pump body
to prevent any damage.

OIL PUMP INSTALLATION

Coating some oil on the O-ring.
Install the oil pump onto the crankcase.
Connect the oil tube.
Connect the oil pump control cable and adjust
the clearance.
《4-1》
CPI MOTOR
GTR50