Setting Date/Time (Clock Set) - Panasonic Lumix DMC-FZ30PP Operating Instructions Manual

Setting Date/Time (Clock Set)

∫ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
PLEASE SET THE CLOCK
CLOCK SET
• When pressing the [MENU] button, the
screen shown in step 1 appears.
• The screen disappears after about
5 seconds. Turn the camera on again or
press the [MENU] button, select [CLOCK
SET] in page 2/4 of the [SETUP] menu
(P23) and set the clock in steps 1 and 2.
1 Set date and time.
CLOCK SET
00 00 :
M/D/Y
SELECT
• 2/1: Select the desired item.
• 3/4: Set date and time.
20
VQT0R81
MENU
JAN 11 2005
. .
SET EXIT
MENU
Preparation
2 Select [M/D/Y], [D/M/Y] or [Y/M/D].
CLOCK SET
10:001DEC.11.2005
SELECT
• Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
• When a fully charged battery has been
inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (The storing time may be
shorter if the battery is not charged
sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• When you use a photo printing service, if
the date is not set in the camera, it will not
be printed, even if the store provides a
date printing option to your photo.
• For the date print setting, refer to P107.
M/D/Y
SET EXIT
MENU