Connections - Panasonic KX-HNB600E Systems Setup Manual

Setup

Connections

Insert the AC adaptor plug firmly into the
DC jack.
Secure the AC adaptor cord by wrapping
it around the hook.
Connect the AC adaptor to the power
outlet.
Insert the telephone line cord into the
LINE jack and a telephone line jack until
you hear a click.
DSL/ADSL service users only: Connect
your DSL/ADSL filter (not supplied).
Outdoor Camera (KX-HNC600) or
Indoor Camera (KX-HNC200) users
only: Remove the label covering the card
slot and then insert the microSD card (not
supplied) into the slot with the notched
corner ( ) facing upwards (
1
clicks into place.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV236E.
R A microSD card (not supplied) is required to
record images from cameras. Refer to the
information about the available microSD
card (page 3).
R To remove the microSD card, push in the
microSD card and then remove it.
12
HNB600E_(en_en)_0421_ver.060.pdf
) until it
2
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
12
3
4
5
1
2
6
2
Note about power connections
AC adaptor connection
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
4
1
2015/04/21 14:13:14