Connecting To A Power Source - Toshiba portege z20-b series User Manual

44
Getting Started

Connecting to a power source

To use external power or to charge the battery you must
attach the AC adaptor. See
on page
NOTE
Connecting to a power source
Your device requires power to operate. Use the power
cord/cable and AC adaptor to connect the device to a live
electrical outlet, or to charge the device's battery.
44.
Please handle your device carefully to avoid scratching or
damaging the surface.
Never pull on a power cord/cable to remove a plug from
a socket. Always grasp the plug directly. Failure to follow
this instruction may damage the cord/cable, and/or result
in a fire or electric shock, possibly resulting in serious
injury.
Always confirm that the power plug (and extension cable
plug if used) has been fully inserted into the socket, to
ensure a secure electrical connection. Failure to do so
may result in a fire or electric shock, possibly resulting in
serious injury.
Be careful if you use a multiple connector. An overload on
one socket could cause a fire or electric shock, possibly
resulting in serious injury.
Always use the TOSHIBA AC adaptor that was provided
with your device, or use AC adaptors specified by
TOSHIBA to avoid any risk of fire or other damage to the
device. Use of an incompatible AC adaptor could cause
fire or damage to the device possibly resulting in serious
injury. TOSHIBA assumes no liability for any damage
caused by use of an incompatible adaptor.
"Connecting to a power source"