Connecting An External Monitor Or Projector; Directing The Display Output When Your Device Is Attached To The Keyboard Dock - Toshiba portege z20-b series User Manual

Connecting an external monitor or projector

You can easily attach an external monitor or projector to your
device if you need a larger screen.
To do this:
1 Read the directions that came with the monitor to see if
you first need to install new software.
2 Connect the monitor's video cable to the RGB (monitor)
or HDMI™ port on the side of the keyboard dock.
3 Connect the monitor's power cable to a live electrical
outlet.
4 Turn on the external device.
Your device will automatically detect the external display
device.
NOTE
Directing the display output when your device is
attached to the keyboard dock
Once you have connected an external display device, you
can choose to use the internal display only, the external
device only, or both simultaneously.
NOTE
The quickest way to change the display output settings is to
use the
Press the
setting you want takes effect. Briefly pause each time you
press the
display to change.
This cycles through the settings in the following order (the
last two options are available if an external monitor is
connected):
❖
PC screen only
❖
Duplicate
Using external display devices
You can change the display settings by pressing the
®
( ) +
Windows
properties settings.
Some modes are only available with the appropriate
device attached and turned on.
®
(
Windows
®
Windows
®
Windows
Getting Started
keys, or by configuring the display
P
) + keys:
P
( ) + keys repeatedly until the
P
( ) + keys to allow time for the
P
67