Related Manuals for Audio international RCD-020-x
Summary of Contents for Audio international RCD-020-x
- Page 1 Product Installation Manual Compact Disc Player / AM-FM Tuner Model No.’s: RCD-020-x (-40x) RCD-021-40x Document #540067 7300 Industry Drive, North Little Rock, AR 72117 Phone: 501-955-2929 Fax: 501-955-2988...
-
Page 2: Audio International, Inc
Revision History Rev. Level Date Description 2/98 Initial Release Applicable Documents Document Drawing Description Rev. 521130 RCD-020-x (-40x) CD Player/AM-FM Tuner 521871 RCD-021-40x CD Player / AM-FM Tuner 560022 Operation’s Guide Document #540067, Rev. IR, Model No.: RCD-02x-x & RCD-020x-40x... -
Page 3: Audio International, Inc
AUDIO INTERNATIONAL, INC. 2/98 Service Bulletin List Service Subject Manual Manual Bulletin # Revision Revision Date List of Illustrations Section Description Page # Document #540067, Rev. IR, Model No.: RCD-02x-x & RCD-020x-40x... -
Page 4: Table Of Contents
PROPRIETARY NOTICE: Despite any copyright notice, this data and information disclosed herein is unpublished and contains confidential, proprietary design owned by Audio International Incorporated. Neither this data nor the data contained herein shall be reproduced, used or disclosed to anyone... -
Page 5: General Information
Additionally, the units are infrared remote control capable. The model number RCD-020–40x and RCD-021-40x will interface with AI proprietary RS-485 data bus; the RCD-020-x will not interface with AI’s proprietary RS-485 data bus. Document #540067, Rev. IR, Model No.: RCD-02x-x & RCD-020x-40x... -
Page 6: Optional Equipment
AUDIO INTERNATIONAL, INC. 2/98 Optional Equipment The front bezel of the RCD can be customized to match the interior style of any aircraft. This includes plating and painting to match aircraft interiors. AI source equipment is configured to accept digital infrared commands. Digital codes allow the source equipment to interface with an infrared handheld remote control (AI-RC1-17xxxx) via infrared receiver, IFR-9A. -
Page 7: Unpacking & Inspection
24 hours and a “Return Request Authorization Number” must be obtained from AI. Refer to the front cover of this manual for address and telephone number of Audio International, Inc.. Repackage the unit in its original packaging materials and return it to AI following instructions given by the AI representative. -
Page 8: Wiring Requirements
AUDIO INTERNATIONAL, INC. 2/98 Wiring Requirements 2.4.1 The installing agency must supply and fabricate all external cables. The length and routing of external cables must be carefully studied and planned before attempting installation of the equipment. Allow adequate space for installation of cable and connectors. Avoid sharp bends and placing cables near aircraft control cables. -
Page 9: Pinouts / Descriptions
1 strap pin to the strap common). Three (3) strap pins are available to allow the infrared codes to be configured. Pinouts / Descriptions 2.7.1 The RCD-020-x (-40x) unit connector with its respective pins and descriptions is as follows: Pin #... -
Page 10: Connector / Mating Connector Information
AUDIO INTERNATIONAL, INC. 2/98 Connector / Mating Connector Information Mating connector part numbers are as follows: Model # Connector Mating Connector RCD-020 & RCD-020-402 CBD21WIM CBD21WIF D20418-2 Female Screw Lock D20419-18 Male Screw RCD-020-1 & RCD-020-401 CBD21WIM CBD21WIF D9/370000V30 Locking Tab... -
Page 11: Audio Adjustment
AUDIO INTERNATIONAL, INC. 2/98 To operate the AM/FM radio, apply power to the unit by turning the tuner power to the “ON” position. Use the AM/FM random search button to select the desired radio station. The station numbers will appear in the digital window as they are “tuned”... -
Page 12: Applicable Drawings
AUDIO INTERNATIONAL, INC. 2/98 FM Tuner Specifications Frequency Range 87.9 MHz – 107.9 MHz Channel Space 200 kHz 9.3 dBf (0.8 µ V/75-ohms) Usable Sensitivity (S/N=30dB) Frequency Response 30 Hz to 15 kHz (+/-3 dB) Signal to Noise Ratio 75 dB (MONO) - Page 13 5.2.2 The following diagram shows the top view of the RCD with unit dimensions. 5.2.3 The following is a reduced diagram showing the side and rear views of the RCD-020-x (-40x) unit showing the ball stud location and unit dimensions. Document #540067, Rev. IR, Model No.: RCD-02x-x & RCD-020x-40x...
- Page 14 AUDIO INTERNATIONAL, INC. 2/98 5.2.4 The following is a reduced diagram showing the side and rear views of the RCD-021-40x unit showing the ball stud location and unit dimensions. Document #540067, Rev. IR, Model No.: RCD-02x-x & RCD-020x-40x...