Attaching The Rain Cover; Connecting The Extension Control Unit - Panasonic AJ-HDC27FP Operating Instructions Manual

Attaching the rain cover

Example showing use of the SHAN-
RC700 rain cover

Connecting the extension control unit

By connecting the AJ-EC3 extension control unit
(optional accessory), some of the functions can be
operated by remote control.
When the AJ-EC3 is connected and the POWER
switches on the unit and AJ-EC3 are set to ON, the
unit is automatically set to the remote control mode.
ECU connector
Close using the fastener.
Dedicated cable
AJ-
6 5
∫ 1
AJ-EC3
Tighten the cord.
<Notes>
O Before connecting or disconnecting the dedicated
cable, be absolutely sure to set the POWER
switches on the unit and AJ-EC3 to OFF.
O When "OFF" has been selected as the ECU DATA
SAVE setting on the CAMERA SW MODE screen
of FILM (CAM) MAIN MENU 2, all the adjustments
and settings made using the AJ-EC3 will be cleared
when the unit's power switch is set to OFF. Neither
is it possible to save these adjustments and
settings on a setup card.
However, the menu item settings can be saved on
a setup card.
When the AJ-EC3 is connected again, its settings
will be restored.
O When "ON" has been selected as the ECU DATA
SAVE setting on the CAMERA SW MODE screen
of FILM (CAM) MAIN MENU 2, all the adjustments
and settings made using the AJ-EC3 will not be
cleared even when the unit's power switch is set to
OFF.
38
Close using the fastener.