Setting The Camera Id - Panasonic AJ-HDC27FP Operating Instructions Manual

Viewfinder screen status displays

Setting the camera ID

The camera ID is set on the CAMERA ID screen.
Up to ten alphanumerics, symbols and spaces can be
used.
<Note>
The camera ID is not displayed while the setting menu
is displayed even if color bar signals are output.
1
Perform the menu operations (pages 84 to 86) to
open the "CAMERA ID" screen of FILM (CAM)
MAIN MENU 2.
n < C A M E R A I D >
I D 1 :
2222222222
I D 2 :
2222222222
I D 3 :
2222222222
2
Turn the JOG dial button to move the arrow
(cursor) to the "ID 1: to 3:" item.
< C A M E R A I D >
n I D 1 :
2222222222
I D 2 :
2222222222
I D 3 :
2222222222
3
When the JOG dial button is pressed, the arrow
(cursor) moves to the ID input area, and the input
mode is established.
< C A M E R A I D >
m
I D 1 :
2222222222
I D 2 :
2222222222
I D 3 :
2222222222
4
Turn the JOG dial button until the character to be
set appears. When the button is turned, the
character displayed is switched in the following
sequence:
Space: )
7
letters: A—Z
7
numbers: 0—9
7
symbols: ', >, <, /, –
5
Press the JOG dial button to enter the character.
6
Turn the JOG dial button to move the arrow
(cursor) to the next position (right), and repeat
4 5
steps and to set the characters.
7
When the characters have been input, turn the
JOG dial button to move the arrow (cursor) to the
":" position.
< C A M E R A I D >
m
I D 1 :
2222222222
I D 2 :
2222222222
I D 3 :
2222222222
8
When the JOG dial button is pressed, the arrow
(cursor) returns to the ID 1:, ID 2: or ID 3: item.
9
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the displays
showing the unit's current statuses appear at the
top and bottom of the viewfinder screen.
<Note>
The camera ID is recorded at the same time as the
color bar signals if "CAMERA ID" on the VF
INDICATOR screen has been set to "ON."
47