Advertisement
W
iring diagram
Route lead wires except for LED in Housing L. ( Fig. D-4)
Fig. D-4
Rib
Line of rib
Line filter
Pass lead wires (black, red) for
DC motor and Switch through
Line filter.
And put Line filter in place
drawn below.
Bend Receptacle for lead wire (red) and
connect it to (+) terminal of DC motor
toward Motor shaft.
Bend Receptacle with lead wire (black) and
connect it to (-) terminal of DC motor toward
Motor shaft.
Do not put the receptacle over the line
designated in the drawing.
DC motor
Boss
Gear
assembly
Boss
Do not put Lead wires on the bosses.
P 11/ 11
Advertisement
