LG 84TR3B Owner's Manual page 67

F4: reads the 4th On Timer data
F5: reads the 5th On Timer data
F6: reads the 6th On Timer data
F7: reads the 7th On Timer data
2. e1h to e7h (delete one index), e0h (delete all
indexes)
E0: erases all On Timer settings
E1: erases the 1st On Timer setting
E2: erases the 2nd On Timer setting
E3: erases the 3rd On Timer setting
E4: erases the 4th On Timer setting
E5: erases the 5th On Timer setting
E6: erases the 6th On Timer setting
E7: erases the 7th On Timer setting
3. 01h to 0Ch (sets the day of the week for the On
Timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2 00 to 17: 00 to 23 hours
Data3 00 to 3B: 00 to 59 minutes
• To read or delete an On Time schedule list, [Data2]
[Data3] must be set to FFH.
Example 1: fd 01 f1 ff ff - reads the first index data
from On Timer.
Example 2: fd 01 e1 ff ff - deletes the first index data
from On Timer.
Example 3: fd 01 04 02 03 - sets On Timer to 02:03
from Monday to Saturday.
• This function is only available when Time 1 (year/
month/day) and Time 2 (hour/minute/second) are
set.
• This feature works as normal when the values for 22.
On timer input are entered.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
22. On Timer Input (Command: f u)
Select an external input for the current On Time
setting and add a new schedule.
Transmission
[f ][u][ ][Set ID][ ][Data1][Cr]
[f ][u][ ][Set ID][ ][Data1][ ][Data2][Cr]
Data (Add schedule)
40: COMPONENT
70: DVI-D (PC)
A0: HDMI1 (PC)
A1: HDMI2 (PC)
D0: DISPLAYPORT (PC)
Data1 (Read schedule)
1. f1h to f7h (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2 (Read schedule)
FF
• To read the schedule input, enter FF for [Data2].
If no schedule is available for [Data1] when
attempting to read the schedule data, the text 'NG'
will be displayed and the operation will fail.
(Example 1: fu 01 90 - Move each schedule input
down one row and save the 1st schedule input in
HDMI mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule
input.)
• This function is supported only when 1 (Year/
Month/Day), 2 (Hour/Minute/Second), On Time
(Repeat Mode/Time) are set.
• It may not be supported depending upon the
model.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
67