Advertisement
R
epair
<1> Disassembling housing R and L
Take off bumper from housing with hand.
Dismount hammer case from housing by taking off
4 hex socket head bolts M5x35, and disassemble
housing R and L as illustrated in Fig. 1.
Bumper
<2> Apply 0.5g of MAKITA grease N No.2 on the
cylindric part of anvil, when inserting it into
hammer case.
<3> Disassembling hammer section
(1) Grip the hammer section with large gear extractor No.1R045
as illustrated in Fig. 3.
Press spindle to hammer by turning the handle clock-wise
until it stops.
Compression spring 14
Hammer
Spindle
Hammer case
Apply MAKITA grease N No.2
Ball bearing 6002LLB
Flat plate
Hex socket
head bolts M5x35
Housing L
Fig. 1
Anvil
Fig. 2
1R165 Ring spring
setting tool B
Fig. 3
Housing R
No.1R045
Large gear extractor
Turn the handle
clock-wise
P 6 / 9
Advertisement
