Operation; Cancelling And Resetting The Programme; Start Delay - Hoover VHV 680F Instruction Book

40006001Eng.qxd 28/07/2009

Operation

1. Open the door and load the drum with laundry. Ensure that garments do
not hinder closure of the door.
2. Gently close the door pushing it slowly until you hear the door 'click'
shut.
3. Turn the Programme Selector dial to select the required drying
programme (see Programme Guide).
4. If drying synthetics, acrylics or delicate items, press the
reduce the heat level.
The light next to the push button will light up when the machine is in
low heat setting. To deselect in the first few minutes of the programme,
press the
setting.
5. Press the
indicator will be continuously lit.
6. If the door is opened during the programme to check the laundry, it is
necessary to press
closed.
7. When the cycle is nearing completion the machine will enter the cool
down phase, the clothes will be tumbled in cool air allowing the load to
cool down.
8. When the programme is complete the END indicator will light.
9. Following the completion of the cycle the drum will rotate intermittently
to minimize creasing. This will continue until the machine is switched OFF
or the door is opened.
Cancelling and resetting the
programme
To cancel a programme press the
flash to indicate that it has been reset.

Start Delay

The Delay Start Function
cycle by 3, 6 or 9 hours.
When the function is first selected the display will show a delay of 3 hours,
subsequent presses of the button will increase the delay to 6 or 9 hours.
To commence the programme press
drying cycle at the end of this time. The 3, 6 or 9 hour indicator light will flash
to indicate that the start delay is in progress.
12:59 Page 15
button, after this time reset the machine to change the
button. The dryer will start automatically and the DRY
to recommence drying after the door has been
button for 3 seconds. The DRY light will
allows the user to delay the start of the drying
and the appliance will complete the
button to
15