Bosch PKS 55 Original Instructions Manual page 16

OBJ_BUCH-841-006.book Page 16 Wednesday, February 22, 2012 3:44 PM
16 | English
10 Parallel guide
11 Retracting blade guard
12 Base plate
13 Lever for retracting blade guard
14 Wing bolt for bevel-angle preselection
15 Blade guard
16 Sawdust ejector
17 Handle (insulated gripping surface)
18 Clamping bolt with washer
19 Clamping flange
20 Saw blade*
21 Mounting flange
22 Saw spindle
Technical Data
Circular Saw
Article number
Rated power input
No-load speed
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
CutControl
Dust/chip box
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Mounting bore
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0.36 ohm.
* PKS 66 AF with guide rail
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 92 dB(A); Sound power level
103 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Cutting wood: a =4.0 m/s , K=1.5 m/s
h
2
Cutting metal: a =3.0 m/s , K=1.5 m/s
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
1 619 929 J64 | (22.2.12)
23 Vacuum hose*
24 Deflection tube for chips
25 Dust/chip box*
26 Slider of dust/chip box
27 Clamping lever for cutting-depth preselection
28 Cutting-depth scale
29 Cutting mark, 45°
30 Cutting mark, 0°
31 Guide rail*
32 Button for guide-rail lock
33 Material clamp*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
3 603 E00 0..
W
-1
min
mm
mm
mm
mm
mm
mm
mm
kg
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
2
,
take into account the times when the tool is switched off or
2
.
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
PKS 55 PKS 55 A
3 603 E01 0..
1200 1200
5600 5600
55 55
38 38
–
–
288 x 153 288 x 153
160 160
150 150
1.8 1.8
20 20
3.9 3.9
/ II / II
PKS 66 A
PKS 66 AF*
3 603 E02 0..
1600
5000
66
48
327 x 160
190
184
1.8
30
5.4
/ II
Bosch Power Tools