HP ProLiant SL250s Gen8 User Manual page 99

Remove the server from the chassis (on page 16).
3.
Remove the front GPU cage (on page 17).
4.
Remove the front GPU bracket (on page 19).
5.
Remove the PCI riser cage (on page 23).
6.
Locate the battery on the system board
7.
Remove the battery.
8.
IMPORTANT:
configuration. After replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
("System board
Replacing the system board battery resets the system ROM to its default
components" on page 10).
Troubleshooting 99