HP ProLiant SL250s Gen8 User Manual page 33

Connect the power cord to the AC power source.
4.
The server automatically turns on after the power cord is connected.
Check the server Power LED status
5.
established.
During the initial server boot (POST), do one of the following:
6.
For advanced users, to modify the server configuration ROM default settings, press F9 when
o
prompted to enter the RBSU. By default, the RBSU runs in the English language.
To retain the HP recommended default server configuration and install the operating system, press
o
F10 to initiate Intelligent Provisioning. Proceed to the next section.
For more information on automatic server configuration, see the HP ROM-Based Setup Utility User
Guide on the Documentation CD or the HP RBSU Information Library
(http://www.hp.com/go/rbsu/docs).
. The LED flashes green to indicate that power connection is
Setup 33