Advertisement
Furnace or air conditioner cycles too
frequently.
The burner on-time
is too short or too long.
IF...
The thermostat current setting does
not match the display temperature.
bAt Lo remains on display after
fresh batteries have been installed
Home and Building Control
Honeywell Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
69-0889
Printed in Mexico
Check system setting on back of thermostat.
Readjust according to instructions on page 2.
THEN...
Check that the wiring hole in the wall behind the wallplate was
plugged with insulation to prevent drafts that might adversely affect
thermostat operation.
Be aware that it is normal for the current setting and display temperature
to differ occasionally.
Remove batteries. Wait one hour. Install fresh alkaline batteries.
Home and Building Control
Honeywell Limited—Honeywell Limitée
740 Ellesmere Road
Scarborough, Ontario
M1P 2V9
6
Helping You Control Your World
QUALITY IS KEY
Advertisement
