Asko Service - Asko D5536 FI Operating Instructions Manual

Connect to cold water...
If you use oil or electricity to heat your home.
Connect to hot water (max. 70 °C)...
If you use district heating, solar power or geothermal power to
heat your home. Choosing a hot water connection cuts program
times and reduces the dishwasher's electricity consumption.
NOTE!
Connecting a dishwasher to the water supply via certain types
of pressure limiting valves may restrict the water supply!
This may cause F:12 error code/ Water inlet fault to be dis-
played.
Electrical connection
Information about the electrical connection can be found on the
compliance plate. This specification must match the electricity
supply.
Dishwashers fitted with a plug must be connected to an earthed
socket.
The electric wall socket must be placed outside of the installation
area to be easily accessible after installing the dishwasher. Do
not use an extension cord!
NOTE!
Repairs and maintenance must be carried out by a qualified
professional.
18

ASKO Service

Information about your product
There is a QR code on the compliance plate. Scan the code to
view information about your product.
Contact the service department
Read the chapter Troubleshooting before contacting the service
department. Provide the details on the compliance plate in all
contact. Include the item number (1) and the serial number (2).
1
ART. NO.:
2 SERIAL NO.:
QR code