Honeywell HZC-363N/P Series Operation Manual page 18

⑥ PZM Masking
: Choose the Color to mask the PZM zone. 8 color
(Black, Gray, Light Gray, White, Red, Blue, Green, Yellow)
is available.
PZM MASKING BLUE → RED → .... → GREEN
⑦ Transparency of PZM area
: Transparency of PZM area can be decided
ALPHA 0 ~ 15
5.8 NIGHTSHOT MODE
<< NIGHTSHOT MODE >>
MODE OFF
DETECT TIME 5
SENSING BRT
D->N LEVEL 1
N->D LEVEL 4
NIGHT COLOR B/W
RETURN
<Fig5-18. NIGHTSHOT MODE >
① NIGHTSHOT MODE
: It is used in low illumination condition. ON is Night mode, OFF is
normal state. Sensitivity of camera becomes more higher level like
BW camera.
external IR illuminator can be available when AUTO mode is
converted ON / OFF automatically according to illuminance change.
MODE OFF → ON → AUTO
② NIGHTSHOT MODE DETECT TIME
: Set time to protect susceptible conversion of ON/OFF according to
illuminance change on Auto. When illuminace keeps the state during
detect time, convert ON/OFF.
DETECT TIME 1 → 2 → .... → 10
③ NIGHTSHOT DETECT MODE
: It is useful with external IR illuminator set on Auto. Select CDS
sensor ON/OFF to detect the illuminance state more effectively.
DETECT MODE
☞ caution
BRT means shooting scene brightness, CDS sensor's operation
depends on circumstantial brightness. Select to match with installation
circumstance.
④ Turnover LEVEL from DAY TO NIGHT
: Set the LEVEL to turnover from Day to Night.
D→N LEVEL
⑤ Turnover LEVEL from NIGHT TO DAY
: Set the LEVEL to turnover from Night to Day.
N→D LEVEL
⑥ Color on Nightshot Mode
: Set Color Mode on Night Mode.
NIGHT COLOR
5.11 Camera ID SET
① ID SET
: Camera ID identifies each assigned Camera when many
cameras are under control. It ranges from 0 to 255, however 0
is not displayed on screen. It is always displayed even though
whole Operating OSD is disappeared from the screen. Still, it is
possible to make non display and to choose display position
(BOTTOM RIGHT, TOP RIGHT, TOP LEFT) by RS-232C
communication.
CAMERA ID
☞ caution
1. In case of Camera ID FIX model, it cannot be selected..
2. ID is not changed by MENU control through communication.
② DISPLAY MODE
: Choose which is to display Camera ID or Title.
DISPLAY
③ DISPLAY POSITION
: Choose Camera ID or Title to display ON/OFF.
POSITION
- 18 -
BRT → CDS → ALL
1 → 2 → 3
3 → 4 → 5
B/W → COLOR
0 ~ 255
CAM ID → TITLE
OFF → ON