Honeywell HZC-363N/P Series Operation Manual page 16

② White Balance Mode Control
: It displays and changes White Balance Mode Control status of
Camera. ( According to Mode, it just display the state and not to
adjust.)
ATW AUTO
INDOOR 3200°K
OUTDOOR 5400°K
MANUAL R/B CONT
AWC LOCK →PUSH
AWC AUTO
(LOCK means Manual white balance status. Press NEAR(+) /
FAR(-) key continuously, LOCK mode becomes PUSH mode and
white balance acts automatically, and then white balance mode is
locked as manual.)
<< WB MODE >>
MODE AWC
CONTROL AUTO
RED 0
BLUE 0
RETURN
<Fig5-11. WB MODE >
③ RED GAIN (Range is different on each Mode.)
: Adjust RED Gain, and tune the sensitivity of white point.
ATW -20 → -19 → .... → 19 → 20
MANUAL 0 → 1 → .... → 254 → 255
AWC 30 (Current RED gain display)
④ BLUE GAIN (Range is different on each Mode.)
: Adjust BLUE Gain, and tune the sensitivity of white point.
ATW -20 → -19 → .... → 19 → 20
MANUAL 0 → 1 → .... → 254 → 255
AWC 30 (Current BLUE gain display)
5.9 BLC/BMB Mode
<< BLC MODE >>
MODE
LEVEL
AREA SEL
BMB COLOR
RETURN
<Fig5-12. BLC MODE >
① Backlight Compensation Mode
: It is for preventing the center object getting too dark when
the excessive light is behind the central object.
Set BACKLIGHT ON, then the center object gets brighten in the
contrast to the background light. Press NEAR/ FAR key in 2 sec,
Backlight mode become AUTO.
MODE OFF → BLC → [ABLC] → WDR → BMB
(WDR [Wide Dynamic Range] function combines dark area's
image and bright area's image inside memory, and makes
a subject shown more clearly.)
( BMB [Black Mask BLC] is different backlight compensation, mask
the excessive light and make objects look clearly.)
② Backlight Compensation Level
LEVEL 5 ( 0 ~ 20 )
<Fig5-13. BLC OFF and ON >
- 16 -
BMB
5
BLACK