Ringer Pattern - Panasonic KX-TS3282B Operating Instructions Manual

• You can exit the programming mode any time by pressing [EXIT].
• If set to OFF, "Ringer off" with the line(s) ("
displayed while the unit is not in use (standby mode).
• You can also change each ringer volume while the unit is just ringing for the
external/intercom line, by pressing VOLUME [ ] or [ ]. To turn the ringer OFF,
press and hold VOLUME [ ].
• You can change the ringer tone for Line 1, Line 2 and Intercom individually
(see below).

Ringer Pattern

You can select one of eight ringer tones for Line 1, Line 2 and Intercom
individually. For Intercom you can select another ringer pattern (Voice
mode, Auto Answer mode or Room Monitor mode), instead of the ringer
tone.
Line 1 is preset to "1", Line 2 is preset to "2" and Intercom is preset to "3".
Ringer pattern
Ringer tone (1 to 8)
Voice mode
(for Intercom only)
Auto Answer mode
(for Intercom only)
Room Monitor mode
(for Intercom only)
• When a paging extension pages all extensions, this ringer pattern setting is not
applicable (p. 48).
For assistance, please call: 1-800-211-PANA(7262)
How the unit works when a call is being received.
The unit rings with the selected ringer tone.
Two short beeps sound, then you are paged with
the caller's voice instead of the bell. To answer
the page, press [SP-PHONE/HEADSET] or lift
the handset.
Two short beeps sound, then the speakerphone
turns on automatically, in response to the page.
Without pressing any button, 2-way intercom with
the paging party is established automatically.
Selecting the Room Monitor mode allows
another extension user to monitor through your
unit. Another extension can call your unit to
monitor a room through it (p. 49). Your unit will
not ring and the SP-PHONE/HEADSET
indicator will light. If you want to prevent your
unit from being monitored by other extensions,
do not select this mode.
", " " and/or "INT") is(are)
1 2
(Continued )
23